In command shift the gear you are in is indicated on the info panel - great as this is essential. But when you are in Drive just "D" is displayed. Does anyone know if and how the gear you are in can be displayed when in Drive? I know it is not really necessary or of interest to most drivers, but boys toys and all that!

J

Forgot: 2012 GS SD4 auto

https://www.freel2.com/forum/topic19314.html

Thanks for this.

^^^Requires a SOLID supply charger and brown pants, per the experts! I have found this to be accurate and balls of steel help as well

Highly recommended but read, and reread, and reread all the posts about how to do it. It’s not for the faint hearted but if you’re reasonably computer literate you should be fine. But if, for example, you don’t know how to find the file that needs to be replaced, then don’t attempt it.

Be aware!
The firmware is made for the old/first style of instrument clusters.
It works for MY2007 to MY2010, but ideally for MY2010 and up until the new/later style of instrument clusters, because it has as starting point the MY2010 firmware.
But, again, it will not work for later type of instrument cluster.

Click image to enlarge

I'd love to have this option on my late model instruments but it seems to be impossible, and apart from that, way too complicated! Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Thanks for the help everyone, but I think it is beyond my capabilities.
J