The clips for the rear speaker panel are the same as the door sills but without the rubber ring.

I have replaced all with the rubber ring.

The door panels are now the same as the sills. The B column etc I put the rubber ones there as well.

Clips:
Door liners: LR013135 (now the same as sills)
Boot liners & tail gate liner: LR006101 (you will break a lot of these)
Sills, & can be used on upper column panels which don't have the rubber, which will reduce sound transmission, anything to help at ear level: LR003015 (Also a lot of these will get broken)
Dashboard trims: FYC500040 (I lost two & recovered one, I know roughly where the other one is)
Boot hook clip brackets: LR004797 (I accidentally damaged one) Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

So after chasing my tail trying to get various indies to do this job I finally bit the bullet and bought a Mongoose Pro. Edited the CCF but still no joy. Was just about to give up when I found another option for Premium Sound System 4x150w, selected this and uploaded CCF, bingo!

Also edited the speakers to 12

I now have a fully working Premium sound system 😊

For anyone interested I will do the same for them for 50 quid. I'm in North Wales

Hello

Everything is connected and ready togo, except the sdd wont give me the option to edit the ccf file
Please help.

Would the gap diagnostic tool be able to turn on the audio upgrade by any chance.thinking of getting one. GS Sd4 2012

From the findings of all my research, I would say yes. Ordered one.
Will let you know how I get on.

Right! I have taken the plunge to do this, ordered speakers from here there and everywhere. Centre speaker was the best bargain £5 brand new, rest full price 🙁. even got a amp of a 2012 model. Once all has arrived I'll then buy the gap tool and programme it in. ( watch this space for problems ) that going to be a hard pill to swallow paying for that but with ears like mine a good sound quality is everything. GS Sd4 2012

Hi all, speakers have arrived today but I seem to have 2 different speakers or are they sided. See pictures

Click image to enlarge

Click image to enlarge

Looks like two different colours of plastic too.

pre facelift is different colour to post facelift.

That is the light plastic is the same colour.. I have found out it is a layer model ( meridian) and is now sorted. GS Sd4 2012

Well upgrade is all done. Went suprisingly easy. While messing around with the gap tool I thought I'd turn on the drl option but nothing different then turning you lights on the dip so I'll turn that off. Can you program a new remote with the gap tool. GS Sd4 2012

Cambo wrote:

Here's a bit of a twist to the Surround retrofit for the cars up to 2012MY...

100mm surround speakers from the Jag XF, Bowers & Wilkins kevlar version
80mm dash speakers from the L405 Range Rover, Meridian Signature version (also kevlar)
165mm door bass speakers from the Jag XF, Bowers & Wilkins kevlar version

The sound is amazing....







The Bowers & Wilkins speakers are a straight swap, same plugs, same dimension.

The 80mm Meridian speakers have a different connector on them, had to cut the existing plugs off and solder in new ones.

So will the Gap IID tool 100% work? I'm in Canada and I've heard that the CCFs aren't as editable in North America as they are overseas? I've taken this to two independent shops, one that uses an Auto logic and another that uses some other tool I've never heard of. I've tried multiple "DD" amps and my original amp still works which means the edit hasn't been done or done properly. I'm willing to spend the ~$700 CAD to get the Gap tool if it will for sure work for me, then probably do the upgrade to the Kevlar speakers from the Jag at some point too. Still cheaper buying the Gap tool than installing an entirely new head unit and amp, as well I don't think I can get the Pro Logic IIx DSP in an aftermarket amp and I'm really curious to see how surround matrixing sounds in a vehicle.

@Rybone89 I bought a cable and software from her https://www.jlridssddmongoose.com/amp/home...v138-v131/

Works perfectly and allowed me to edit the CCF to enable the Premium HiFi.

Thanks! Wow that's way cheaper than the Gap tool. Do I need to buy "optional softwares" or "optional preconfigured laptop options"

What do I do once this arrives?

Well it's already arrived from the UK here to Canada, insanely fast shipping! But what the heck do I have to do to configure the premium surround? Reinstalling the "DD" amp now...haven't plugged the Mongoose into my vehicle or laptop yet. Help appreciated, thanks!