Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Cam belt change time? |
|
|
Mikey Member Since: 07 Jun 2008 Location: Dundee Posts: 780 |
My local dealer only stocks the belts, they don't stock the kits with the water pump included... |
||
13th Mar 2020 9:39 pm |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4103 |
When I did mine, I used a universal flywheel locking tool and a couple of drill bits. Physically hardest part for those without an air impact tool will be removing the crank pulley bolt. Mine seemed to be glued in right up to the last thread - undoing that manually would have given me a dead-arm! Past: FL2 TD4 HSE Auto
|
||
14th Mar 2020 7:40 am |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1664 |
My next service is 112k. I'm only on 52 or August.
|
||
14th Mar 2020 8:45 am |
|
AJ918 Member Since: 26 Mar 2018 Location: North West Posts: 260 |
Hi doing mine next month now I've got all the parts needed, parts costings for both sets of belts timing and serpentine inc water pump all tensioners and idler bearings together with new coolant/antifreeze and the engine locking tool needed to do the job under £197 detail costings below. I am changing both the belts and all the bearings, I know it's a bit over kill but whilst it's in bits no extra Labour needed, you have to take the serpentine belt off to do the timing belt, so just the parts.
|
||
14th Mar 2020 8:45 am |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 959 |
This will do it jules. https://www.ebay.co.uk/itm/Engine-Timing-L...SwXcVcofG7 (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal. 171037Km as of 09/05/22 Superchips Bluefin Flash Nanocom Evo II (also sold) |
||
14th Mar 2020 10:21 am |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Looking up the Gates website, to get the kit numbers, then onto eBay to find retailers, I can find a range of sellers for the timing belt kit, but not the V-belt kit. Or at least not the one on the Gates site.
|
||
14th Mar 2020 12:15 pm |
|
Mikey Member Since: 07 Jun 2008 Location: Dundee Posts: 780 |
LR000996 |
||
14th Mar 2020 3:44 pm |
|
AJ918 Member Since: 26 Mar 2018 Location: North West Posts: 260 |
The main belt manufactures say:-
|
||
14th Mar 2020 5:39 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4952 |
cheers Jules |
||
15th Mar 2020 9:17 am |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
The two 1700 Gates kits were coming up when I was searching on eBay and entering FL2 details. Mikey, thanks for the LR part number, which throws up plenty of 1745ish v-belts. Still can’t track down the combined Gates kit, so will just go for the separate LR000996 belt and LR003651 tensioner. 2005 D3 2.7 Auto Previously: 2010 MY FL2 TD4e GS - Now gone at 199,500 miles, about 135,000 of them mine. ‘93 Defender 110 200TDi CSW ‘87 Defender 90 4 cyl Petrol ‘83 110 CSW V8 - best ever! Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch) Series III SWB Diesel |
||
15th Mar 2020 9:36 am |
|
Landymanstan Member Since: 22 Feb 2020 Location: east yorkshire Posts: 26 |
Hi I would check out this link https://www.autodoc.co.uk/gates/14545377 it seems what your looking for!! I would enter your reg for correct part.... |
||
15th Mar 2020 11:21 am |
|
AJ918 Member Since: 26 Mar 2018 Location: North West Posts: 260 |
Got mine from Parts in Motion off eBay still on there today |
||
15th Mar 2020 12:41 pm |
|
Worms Member Since: 31 Oct 2017 Location: Highlands Posts: 635 |
Thanks both!
|
||
15th Mar 2020 1:17 pm |
|
Landymanstan Member Since: 22 Feb 2020 Location: east yorkshire Posts: 26 |
Ok Worms nice to know this I only found them by search, not used them before thanks for the info...am also looking for same parts I found these https://www.ebay.co.uk/itm/Fan-Belt-Tensio...4147501190 I could not find the parts in motion ones for my model... |
||
15th Mar 2020 4:22 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis