Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > United Kingdom > Mystery clunking noise issue |
|
|
Volrider Member Since: 14 Aug 2018 Location: staffs Posts: 217 |
Have you checked to see if the engine under tray is still there? It sounds as if something was lose hence the thumping then eventually fell off. I would be tempted to take it to a local garage not a main dealer and ask them to pop it up on the ramps to check underneath, probably do it for a few quid if nothing is wrong other than an engine undertray etc. 2014 Freelander 2 XS TD4
|
||
9th Jan 2020 6:18 pm |
|
Mcvdbp Member Since: 09 Jan 2020 Location: Carlisle Posts: 8 |
Hi, thanks for your reply...the under tray is still on, although not sure if anything that should be there still is. Are these difficult in removing and replacing in order to check , are they all in one piece ?
|
||
9th Jan 2020 6:54 pm |
|
GlynnB Member Since: 20 Feb 2012 Location: South Yorkshire Posts: 127 |
Have you checked for a broken spring? Silver 2009 HSE |
||
10th Jan 2020 5:57 am |
|
Mcvdbp Member Since: 09 Jan 2020 Location: Carlisle Posts: 8 |
Hi I checked the springs and cannot see any breakages, my thoughts now are with a heat shield that may have worked loose and fallen through the engine compartment . |
||
10th Jan 2020 3:28 pm |
|
thehelper Member Since: 29 Jul 2018 Location: Cambridgeshire Posts: 151 |
I had a similar noise a week ago. Reported in another thread!
|
||
10th Jan 2020 4:30 pm |
|
Mcvdbp Member Since: 09 Jan 2020 Location: Carlisle Posts: 8 |
Thankyou my friend ! ...just checked and Near side spring at the bottom has a jagged end to it so it looks like a few inches are missing.
|
||
11th Jan 2020 12:33 pm |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 |
..... don't want to add to your woe, good practice is to change both springs on the same axle.
|
||
11th Jan 2020 12:43 pm |
|
thehelper Member Since: 29 Jul 2018 Location: Cambridgeshire Posts: 151 |
My local garage just did mine, 1¾ hours labour.
|
||
11th Jan 2020 12:43 pm |
|
NJSS Member Since: 15 Nov 2012 Location: Near Petersfield, Hampshire Posts: 32 |
Not too expensive with a good Indy.
|
||
11th Jan 2020 12:43 pm |
|
thehelper Member Since: 29 Jul 2018 Location: Cambridgeshire Posts: 151 |
Whilst that is good practice in most cases. Most experienced engineers will tell you that springs normally break through manufacturing defects or accidental damage causing stress points, rather than age related fatigue. I would just have the other spring examined and if there is no sign of damage leave it alone. But that is just my opinion and that of my experienced colleagues in the trade. |
||
11th Jan 2020 12:54 pm |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2594 |
I can see that but would be happier with a new pair. |
||
11th Jan 2020 1:24 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis