Freel2.com - View topic - FL2 WON'T START AFTER TIMING BELT CHANGED


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > General > FL2 WON'T START AFTER TIMING BELT CHANGED

Page 1 of 1

Print this entire topic ·

Kerrbhoy

Member Since: 11 Aug 2019
Location: Glasgow
Posts: 8

FL2 WON'T START AFTER TIMING BELT CHANGED

I've changed the timing belt on freelander 2.now the
immobiliser won't let me start please can you anyone help...

11th Aug 2019 2:20 pm

SYFL2

Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2594

2007 Freelander 2 TD4 HSE Auto Stornoway Grey

I don’t know what would cause this after a belt change,have you tried disconnecting the battery and doing a hard reset ?

11th Aug 2019 2:24 pm

Kerrbhoy

Member Since: 11 Aug 2019
Location: Glasgow
Posts: 8

No never do that....someone said start from scratch take the belt off...I'll give the battery a go cheers

11th Aug 2019 2:36 pm

Kerrbhoy

Member Since: 11 Aug 2019
Location: Glasgow
Posts: 8

How do you do a hard reset

11th Aug 2019 2:37 pm

Pedro

Member Since: 01 Apr 2010
Location: Very near Pig Hill
Posts: 449

2010 Freelander 2 TD4 HSE Auto Galway Green

1. Search on here for a hard reset.
2. Did you follow the LR procedure with the locking tools x 3 etc and the proper tensioning procedure ?
3. How do you know that it is the immobiliser that is not allowing you to start ?
4. Have you tried your other key ?
5. Have you replaced the crankshaft position sensor correctly ? FL2 HSE Auto Galway Green
Evoque SD4 Auto Blue.
FL1 HSE TD4 Manual Black - Gone.
RR Classic V8 EFI - Gone

11th Aug 2019 2:44 pm

Kerrbhoy

Member Since: 11 Aug 2019
Location: Glasgow
Posts: 8

The immobiliser light staying on and wee done the belt by the book...

11th Aug 2019 2:46 pm

Kerrbhoy

Member Since: 11 Aug 2019
Location: Glasgow
Posts: 8

Oh and car turning over and immobiliser flashing

11th Aug 2019 2:47 pm

ronp

Member Since: 15 Jun 2009
Location: 🌲Galloway🌲
Posts: 1477

Mickey [the LR specialist in Dundee] also had an issue when he changed his timing belt.
https://www.freel2.com/forum/topic34227.html
Maybe a pm to him? FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

11th Aug 2019 4:45 pm

Mikey

Member Since: 07 Jun 2008
Location: Dundee
Posts: 780

2012 Freelander 2 SD4 HSE Auto Baltic Blue

If its cranking, its not an immobiliser issue.

Suspect either the timing is out, or you have damaged the crank trigger wheel...

Edit: My issue happened 36 hours, and 20 miles later, through a blown intercooler. That wouldn't cause a non start situation

11th Aug 2019 6:12 pm

Paul4751

Member Since: 02 Mar 2018
Location: lightwater
Posts: 205

2012 Freelander 2 SD4 HSE Auto Alaska White

That is why I take it to a specialist!

11th Aug 2019 6:40 pm

Badger51

Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 959

As Mikey has suggested, maybe incorrect timing but as it cranks ok I would lean more to the crank sensor/wheel. I'd be checking the cps plug has also been reseated properly if you disconnected it. Let us know how you get on. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

12th Aug 2019 7:50 am

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum