Edited due to me being thick
Hiya all,
It was ‘Dave’ Pedro’ and ‘BossBob’ that helped me last time.
I’m a ‘newbie’ and not quite sure if I’m doing this right.
My 2008 Freelander 2 HST TDI Automatic is cutting out whilst I drive. It was suggested that my problem could be one of these. ‘A faulty fuel pump, a faulty fuel filter or a faulty crankshaft sensor’
I did some extra research on the web and the most popular fault was a ‘faulty fuel filter’ so I went with that ….. WRONG.
When I took the car in to the mechanic yesterday, he first read the ‘fault codes’ as BossBob’ said he would. They were:
Po489 = EGR circuit low … don’t know what that means.
Po42e =EGR stuck open … don’t know what that means.
And …. get this
Po336 = Crankshaft sensor
Po 336 = Crankshaft sensor
The ‘o’ might be a ‘0’ …. Not sure
So, the fuel sensor was sent back and a new Crankshaft sensor has been ordered … now all I have to do is wait for an appointment to take my car back in and see if that does the trick.
I can’t do the job myself as I am unwell (terminal) so everything is the hands of my mechanic.
Many thanks for all your help
Marcus

Edited due to me saying something else that was wrong and i was corrected by Alex. the problem is the [b]CRANKSHAFT sensor

Last edited by Marcusct on 14th Jun 2019 7:03 am. Edited 1 time in total

Crankshaft sensor maybe ?...
In order to not buy a wrong and unneeded part ?...

Thank you Alex,
Yes it looks like the problem is the crankshaft sensor according to the mechanic, the fuel filter has been sent back and was not needed.
Thank you very much for answering,
Marcus

P048900
Exhaust Gas Recirculation Control Circuit Low
EGR Valve position deviation valve stuck open
Check/clear EGR valve from obstruction/sticking

P042E00
Exhaust Gas Recirculation Control Stuck Open
EGR Valve stuck during normal engine running - attempt to unstick valve unsuccessful
Check/clear EGR valve from obstruction/sticking FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

I have mentioned the crankshaft sensor, in a way as a correction and to be sure, because in the first post you've kept saying camshaft sensor.
And the P0336 error is for the crankshaft sensor, not camshaft...

https://www.obd-codes.com/p0336

P0336 Crankshaft Position Sensor A Circuit Range/Performance

Edited to correct name -- sorry Alex FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Last edited by IanMetro on 13th Jun 2019 10:21 pm. Edited 1 time in total

IanMetro wrote:

https://www.obd-codes.com/p0336
P0336 Crankcase Sensor

Please don't....
You'll confuse the users even more....
P0336 = Crankshaft !!!
Not crankcase. And neither camshaft...

EDITED P0336 Crankshaft Position Sensor - A Circuit Range/Performance. Alex

Thanks Alex,
Just re-read what the mechanic wrote, his writing isn't clear, of course it's the crankshaft sensor, my mistake and I didn't realize the difference when you corrected me ...... sorry.
Thanks for the other fault code meanings!

Many thanks,
Marcus