Hey everyone

Loving owner of a 56 plate FL2

Got a question about the reverse gear

When engaging I put in right

Then when lifting foot off clutch it goes further back
But when I dip the clutch the stick goes forward if do it
to fast it will jump out of gear ??

It’s a manual
120k miles
New clutch last year ( prev owner had it done )

NO other problems with 1-6th gears
No clunking sounds
Just. Ping out ha


Thanks

Lubricating linkages on the box may help but is probable a worn selector cable or needs re-setting.

http://www.freel2.com/forum/topic3292.html...ng+reverse FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Ok buddy will have a gander

Yorky Bob wrote:

Lubricating linkages on the box may help but is probable a worn selector cable or needs re-setting.

http://www.freel2.com/forum/topic3292.html...ng+reverse

Ok to close this topic

It was the lower right ( drivers side ) stability mount causing the fault

Thanks for letting the forum know, a perfect example of how it should be done. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Ha no dramas

Yeah I hate scrolling though and not finding if things fixed it or not