Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Brake Disk and Pads question |
|
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5062 |
I would tend to agree - but Im surprised disks are covered for wear. Jules |
||
25th Jan 2019 10:50 pm |
|
Fnfwi2 Member Since: 02 Mar 2016 Location: None Posts: 38 |
Just had brake service at main dealers. Surprised at difference between wear rates front and rear. Rear pads were down to 2mm (and were therefore changed) front were 6mm (and were left alone). Car has done 60,000 miles. Could the difference be down to the electronic parking brake? |
||
12th Feb 2019 12:09 pm |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
Yes FL2 MY10 TD4 GS traded in at 2 years
|
||
12th Feb 2019 1:17 pm |
|
Fnfwi2 Member Since: 02 Mar 2016 Location: None Posts: 38 |
Odd, because I hardly ever use the parking brake, and never when the car's parked up. Maybe it's down to lack of use? |
||
12th Feb 2019 1:42 pm |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
You asked if it was down to the electronic parking brake. Previous earlier versions of FL2 with a separate cable brake do not chew rear pads as quickly so it a loaded question is it not. Leaving it on or off is immaterial, the rear pads will wear just as rapidly, that is how the braking force is factory set up to the size of the calipers and factory standard pads used.
|
||
12th Feb 2019 2:05 pm |
|
Fnfwi2 Member Since: 02 Mar 2016 Location: None Posts: 38 |
I know what you mean but this is an auto and the EPB would really only be used to hold the car on an incline in heavy traffic - and I hardly ever encounter that! In this part of the world I can drive up to 50 miles sometimes and not see another car - and probably use the brakes very little on the journey. I was just curious why the rear pads wear out so much faster than the fronts - maybe a caliper was seized. |
||
12th Feb 2019 3:07 pm |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 |
For what it is worth, my MY10 HSE Auto also wears it’s rear pads quicker than fronts. Previously I fitted new disks and pads (all LR supplied). Have just changed the rear pads after 33,613 miles yet they still have better than 5mm left on them. Front pads look about half life left still. NB: This time I fitted Brembo pads (EuroCarParts had a deal - when do they not?) Let’s see if they chew up the discs!
|
||
12th Feb 2019 3:16 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3156 |
I have had shorter life on rear pads compared with front, although it was my front discs which needed changing later with pads. (On my previous XS FL2) The FL2 is the first car that this has happened, and I put it down to the ride and handling systems (Dynamic Stability Control, Roll Stability Control, Etc) applying the individual rear brakes to counter/correct my driving. I do tend to avoid using brakes if possible and slow naturally for corners. (which I don't always judge right) FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011) FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015) Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History (Expensive, but Trouble/Worry free - hopefully?) |
||
12th Feb 2019 8:59 pm |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 |
I don’t think anything is covered for wear under warranty (unless there’s a fault causing the excessive wear - sticking calliper for example wearing the pads out). Discs are covered for excessive run out. Past: FL2 TD4 HSE Auto Evoque SD4 Dynamic Lux Auto Present: Audi A3 S Line. |
||
13th Feb 2019 7:40 pm |
|
rsash Member Since: 20 Jan 2015 Location: Pineapple Picking Country Posts: 93 |
The rear brakes wear quickly because the pads are tiny for the weight of the car.
|
||
14th Feb 2019 6:46 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5062 |
I think you are incorrect. The older cable hand brake uses a separate brake but the EPB uses the same pads via an electric motor working on the same brake caliper and pads.
|
||
14th Feb 2019 11:37 pm |
|
Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109 |
But they only come on when the vehicle is stationary so no real wear takes place. How could it? I don’t think I’ve manually operated the epb on our Evoque more than half a dozen times in the three and a bit years of ownership. It comes on when I switch off and realeases when I put it in gear. Past: FL2 TD4 HSE Auto
|
||
15th Feb 2019 7:51 am |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5062 |
Steve: Are you sure? The FL manual says that automatic application of the EPB only occurs in cars with manual gearboxes. With automatic gearboxes the EPB has to be applied manually, otherwise it remains off when you switch the engine off. Are you not just leaving the autobox locked up in Park ? Maybe the Evoque is different to the FL2 but I doubt it.
|
||
15th Feb 2019 7:48 pm |
|
Fnfwi2 Member Since: 02 Mar 2016 Location: None Posts: 38 |
FL2 auto, engine running, foot on foot brake, apply EPB - you can feel the pedal sink as EPB (and light on dash) comes on. Foot on foot brake and switch off, this doesn't happen so EPB doesn't automatically come on when switching off. |
||
15th Feb 2019 8:02 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis