Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Battery light staying on |
|
|
mgwanderer Member Since: 18 Sep 2015 Location: Kortrijk Posts: 124 |
Hi,
|
||
22nd Jun 2018 9:15 am |
|
mgwanderer Member Since: 18 Sep 2015 Location: Kortrijk Posts: 124 |
Sorry I removed the first reply which had this in it
|
||||
22nd Jun 2018 9:37 pm |
|
TheGman Member Since: 14 Jul 2013 Location: Scotland Posts: 7 |
Thanks for all your help mgwanderer, got it fixed today, more or less damaged same place as yours, just as blue/brown cable came out he loom cable protection.
|
||
23rd Jun 2018 4:37 pm |
|
pedro 2 Member Since: 30 Jul 2018 Location: charley, leicestershire Posts: 7 |
hi all. does anyone know what amps the communication wire is? I was hoping to repair it, but have found it easier to bypass the problem. Trouble is I can buy as much wire as I need, but have been confused by the amount of different amp cables are available. Would appreciate any help. Thanks. Pedro. |
||
29th Aug 2018 6:40 pm |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
What you need is more power:
|
||
29th Aug 2018 7:48 pm |
|
mgwanderer Member Since: 18 Sep 2015 Location: Kortrijk Posts: 124 |
Hi Pedro, as this is only a signal cable (and not carrying the charging current itself) there is no need for this to be heavy duty cable. The smaller 1.5 mm /2.00mm cable should be more than sufficient but covering the damaged / repaired area with heat shrink will help the insulation quality.. Good luck Clive If it ain't ***ked don't fix it |
||
30th Aug 2018 6:42 am |
|
pedro 2 Member Since: 30 Jul 2018 Location: charley, leicestershire Posts: 7 |
Hi Clive. Thanks for the info. going to get on it today, so will give you an update on how it goes. Pedro. |
||
30th Aug 2018 9:27 am |
|
pedro 2 Member Since: 30 Jul 2018 Location: charley, leicestershire Posts: 7 |
Hi Clive. Job done !! Took a bit of jiggling about. Had to dismantle fuel filter system and move a couple of looms but got eyes on to the problem. Did exactly what was advised by other members. Saved a couple of hundred pounds doing it myself. Many thanks to you and all members for the info and tips . Pedro. |
||
30th Aug 2018 4:13 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5021 |
Cheers mate - very useful info - Im changing the fuel filter soon and will check out the blue wire and add some more protection as a preventative measure. Jules |
||
30th Aug 2018 5:24 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis