Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > In Car Electronics > Heated Steering Wheel Retrofit MY15 - Completed
Post Reply  Down to end
Page 5 of 5 <12345
Print this entire topic · 
Stuartc



Member Since: 01 Dec 2014
Location: Perth, Australia
Posts: 2292

Australia 2015 Freelander 2 SD4 HSE Auto Aintree Green

Ok
I can’t clearly see what your problem is, you need to remove it completely but I suspect you don’t have the correct harness.
Disassembled the entire wheel and start again and check you have plugged in all plugs and
Sockets. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Post #348760 2nd May 2018 2:46 pm
View user's profile Send private message View poster's gallery Reply with quote
AjM



Member Since: 09 Sep 2014
Location: South Devon
Posts: 124

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Santorini Black

Thanks Stuartc. I have done that and still no further ahead (three times actually). I have checked with LR and it is the correct heated module and wheel. It says with speed control, I assume that is cruise? However the cruise is on the left hand switchpack so it shouldn't make any difference.

The only other think I have just noticed is that the on the old r/h switchpack the top 2 pins in the large block are missing and are present in the new one. However the white plug that goes into that block does not have wires in the top 2 holes. Is this possibly an issue?

What I don't get is on every forum I have looked at and that is a lot in the last 5 hours, it has been plug and play, but not for me.... Big Cry

If I can't sort it soon, I will have to abandon it and send it all back as I can't have my car in pieces... Big Cry Big Cry

Post #348762 2nd May 2018 2:53 pm
View user's profile Send private message View poster's gallery Reply with quote
AjM



Member Since: 09 Sep 2014
Location: South Devon
Posts: 124

United Kingdom 2013 Freelander 2 SD4 Dynamic Auto Santorini Black

Just a sudden thought, when others have done this have they used the switchpack wiring harness from the old wheel or a new one?

Post #348763 2nd May 2018 3:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Vanny



Member Since: 06 Dec 2015
Location: Cheshire
Posts: 437

United Kingdom 2013 Freelander 2 SD4 XS Auto Santorini Black

I am a completely spoilt. Pretty much every car I get to drive that isnt the FL2 has a heated steering wheel.

FL2 must do better!

Clock spring out;

Click image to enlarge


New clock spring in. Notice the white break away tab at the bottom. This is used to keep the tracks of the 'clock spring' centred during installation.

Click image to enlarge


Clock spring in, next is the rather laborious process of rebuilding the old wheel into the new.

Click image to enlarge


Finished rebuilding

Click image to enlarge


And on to the car

Click image to enlarge



Its lovely and warm, and its not even cold outside. The other half is pretty made up with it to.

Post #383018 21st Dec 2019 8:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Stuartc



Member Since: 01 Dec 2014
Location: Perth, Australia
Posts: 2292

Australia 2015 Freelander 2 SD4 HSE Auto Aintree Green

Laughing Welcome to the club Thumbs Up
Before you get all “toasty” Did you update your CCF?
It’s works without but it does generate a “Configuration incomparable” dtc if you don’t! MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Post #383026 21st Dec 2019 11:58 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 5 of 5 <12345
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site