robbyvrs wrote:

Are yours the DMB ones? - guess i'll order set of those if the ebay badges are no good

de1979 wrote:

... or take the green badge off and use the gel overlay one directly to the backing plate or grill. Works well!

How did you find the best way of getting the green badges off without doing damage to the black surround? In two minds weather to put them over the green badges that are already there or just take the green ones out. Any help Will be great for my decision

If I recall I used a small flat blade screwdriver to get it started then a trim remover tool to prise the rest off. I didn't damage the backing plate. The front black badge needed approx. 1mm trimming from the side though to account for the loss of 'oval' shape in the original metal badge. You'd never notice on a passing bus though.

I didn't have the option of putting them on top of the green badges as I'd already removed them to replace with the metal black ones from ebay, which obviously fell to pieces!

thanks for that de1979 will give it a bash
did you do the pillar ones with the same method to?

Apply some heat to the badges also it’ll make them easier to come away MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s