Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Suspension Lift Spacers |
|
|
Monsoon Member Since: 13 Mar 2014 Location: WA Posts: 2 |
Has any one tried these
|
||
8th Apr 2015 12:31 am |
|
Uncleron Member Since: 08 Mar 2013 Location: Glasgow Posts: 98 |
Must admit I have never seen or heard of these but at around �500 for 2 sets delivered giving 24mm lift front and rear they are certainly not cheap for the equivalent of �125 per spacer / corner. |
||
8th Apr 2015 10:00 am |
|
cqr Member Since: 05 Mar 2013 Location: kent Posts: 1308 |
I'am thinking off housing them on the front only
|
||
8th Apr 2015 10:58 am |
|
Uncleron Member Since: 08 Mar 2013 Location: Glasgow Posts: 98 |
As regards not fitting rear spacers I suppose it depends on what sort of terrain you are off-roading on and how much ground clearance you are looking for......
|
||
8th Apr 2015 11:52 am |
|
cqr Member Since: 05 Mar 2013 Location: kent Posts: 1308 |
I'am going to lift the hole car,25mm rear/20 front
|
||
8th Apr 2015 1:08 pm |
|
cqr Member Since: 05 Mar 2013 Location: kent Posts: 1308 |
Any uk sellers yet for lift kits 2008 xs
|
||
3rd Nov 2015 6:56 pm |
|
Salona Member Since: 15 Oct 2017 Location: Aberdeenshire Posts: 4 |
Hello folks. I have designed moulds for the front and rear spacers and am thinking about having the moulds machined from billet aluminium and will be starting to cast spacers using 80 shore hardness polyurethane. Just wondering if there is any interest out there for these spacers which I reckon will be priced at �30 each for front spacers and �35 each for rear spacers making a complete set �130 in total. Was also wondering what colour folks would prefer them to be cast in. If there is enough interest, I could have the first batch ready within 2 weeks. |
||||
25th Nov 2017 10:01 am |
|
Dave47 Member Since: 31 Aug 2014 Location: Margate Kent Posts: 1338 |
Hi Salona, interested in these (subject to insurance comp)
|
||
25th Nov 2017 12:15 pm |
|
Salona Member Since: 15 Oct 2017 Location: Aberdeenshire Posts: 4 |
To start with I was going to stick with the 20mm fronts and 25mm rears. |
||
25th Nov 2017 12:21 pm |
|
Uncleron Member Since: 08 Mar 2013 Location: Glasgow Posts: 98 |
Good to see some more interest in spacers again - Good job!
|
||
26th Nov 2017 12:10 pm |
|
Salona Member Since: 15 Oct 2017 Location: Aberdeenshire Posts: 4 |
Very good point. I can easily adjust the design so that it incorporates stainless anti-crush sleeves that are slightly shorter than the height of the spacers. Would put the cost up a wee bit but not too much. |
||||
27th Nov 2017 7:11 am |
|
Tomtom Member Since: 30 Apr 2017 Location: Brisbane Posts: 23 |
I'm extremely interested in buying spacers. If I can't buy them ready-made I have planned to get them fabricate, but I'm just a little hesitant due to a couple of important missing details here.
|
||
14th Dec 2017 11:37 am |
|
tzablo Member Since: 22 Sep 2017 Location: Warsaw Posts: 36 |
I will look at the progress of the work with interest 130 GPB it will be ok price even for Polish FR2 user:) https://www.instagram.com/halotuswiat/ |
||
14th Dec 2017 9:49 pm |
|
philllip Member Since: 08 Dec 2014 Location: Noosa, Queensland Posts: 169 |
I'd love to get hold of a set of these. Still possible?
|
||
10th Jan 2018 7:41 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis