Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > Haldex Maintenance |
|
|
darrenm Member Since: 07 May 2016 Location: NG12 2HT Posts: 19 |
FORGOT to add
|
||
10th May 2016 10:51 am |
|
RogB Member Since: 16 Dec 2014 Location: Mansfield Posts: 3880 |
its near a town called Bewdley in West Midlands. M1/M42/M5 North/ A38 towards Kidderminster. (its near where I grew up and family still live down there, im not just a sad route spotter )
|
||
10th May 2016 11:12 am |
|
darrenm Member Since: 07 May 2016 Location: NG12 2HT Posts: 19 |
YB -- can I ask what was the overall cost of the work done.
|
||
10th May 2016 11:59 am |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
Cost would/could differ as I had got hold of a Haldex 4 filter using a Volvo part number and oil to do it myself then threw the towel in due to my ramps collapsing.
|
||
10th May 2016 1:11 pm |
|
iain cooper Member Since: 27 Aug 2007 Location: north of Glasgow Posts: 1989 |
this job should be done as part of a dealer service and would prevent the Haldex problems.
|
||
10th May 2016 1:37 pm |
|
austen_fl2 Member Since: 03 Dec 2014 Location: Worcestershire Posts: 146 |
That is where the breather for the diff and haldex exit. It shouldn't really be blowing out. Have you got mismatched front and rear tyres??? Or could be haldex dragging and heating up the diff. Or it's been over filled. www.bellengineering.co.uk |
||
10th May 2016 2:56 pm |
|
Mikey Member Since: 07 Jun 2008 Location: Dundee Posts: 780 |
And yet, here we are
|
||
10th May 2016 3:44 pm |
|
darrenm Member Since: 07 May 2016 Location: NG12 2HT Posts: 19 |
Austen -Thanks for the reply
|
||
10th May 2016 6:02 pm |
|
littletriple Member Since: 27 Mar 2014 Location: kent Posts: 226 |
don't wait for any symptoms of Haldex problems, it'll be too late by then. This is preventative stuff which arguably should be part of the official service schedule. |
||
10th May 2016 7:14 pm |
|
austen_fl2 Member Since: 03 Dec 2014 Location: Worcestershire Posts: 146 |
Would definitely support the preventative approach as the haldex is an expensive bit of kit to replace.
|
||
10th May 2016 7:23 pm |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
If you have only recently purchased the vehicle via a dealer ask them to put into working order. Check your consumer rights on the HONEST JOHN web site. FL2 MY10 TD4 GS traded in at 2 years FL2 MY13 TD4 GS Current |
||
10th May 2016 7:36 pm |
|
rsash Member Since: 20 Jan 2015 Location: Pineapple Picking Country Posts: 93 |
Not quite the same as gearboxes and diffs have gears that mesh so wear should be quite low, Haldex uses clutches that engage and disengage every time you pull away so there will be a lot more wear.
|
||
10th May 2016 8:55 pm |
|
devondave Member Since: 06 Dec 2010 Location: United Kingdom Posts: 224 |
Should this thread be merged with the Haldex Service one? |
||
11th May 2016 8:34 am |
|
Yorky Bob Member Since: 28 Apr 2015 Location: Yorkshire Posts: 4561 |
Check they are taking it out and fully cleaning it and not just doing a oil and filter change in situ. Reason is with no drain plug the gunk off the clutch plates sits in the lower casing and the internal filter cannot be cleaned with unit still on car. FL2 MY10 TD4 GS traded in at 2 years FL2 MY13 TD4 GS Current |
||
11th May 2016 9:08 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis