Hi Im going to buy a rear spoiler for Flora

It will come unfinished, so does anybody know how much paint I will need to spray it?

Cheers North Wales Land Rover Club

1984 90 undergoing full restoration.

If you are really efficient with 150g spray cans you will cover about 0.5 m2 maximum. I would always have twice what you need. Also have the other spray cans ready to go just in case one blocks as you are painting. Nothing worse than interruptions while painting.

Mount the part so you can paint around it. Don't forget to shake cans for a full 2 minutes. Paint takes a week to fully harden. Be very very patient. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

TA  North Wales Land Rover Club

1984 90 undergoing full restoration.

This question reminds me of the time I wallpapered my hall. Not knowing how many rolls of paper I needed, I asked my neighbour who has the same size hall how many rolls he bought when he did his. "Nine" he said. Anyway, I papered the hall and had three rolls left over. When I told him he said "That's strange, so did I".  Past: FL2 TD4 HSE Auto
Evoque SD4 Dynamic Lux Auto
Present: Audi A3 S Line.

Some more comments about touch up paint, post #7
http://www.freel2.com/forum/topic24067.htm...+paint+150 Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Last edited by Lightwater on 7th May 2016 11:51 am. Edited 1 time in total

Steve D wrote:

This question reminds me of the time I wallpapered my hall. Not knowing how many rolls of paper I needed, I asked my neighbour who has the same size hall how many rolls he bought when he did his. "Nine" he said. Anyway, I papered the hall and had three rolls left over. When I told him he said "That's strange, so did I".

If you're planning on using aerosols, I wouldn't bother. I got my last rear spoiler plastic primed and painted, along with all four side rubbing strips, by a local bodyshop, for £120. Not only was it a fair price, but it gave me a finish and durability that I could never have got close to with aerosols.

At £120 I would get someone to get it done simply because people don't know how to get the best out of spay cans.

I also have my own manual spray can filling machine for matching colours but when I can, I use off the shelf cans because they are so cheap if buying a dozen or so.

Probably gone through about 2000 cans! Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Last edited by Lightwater on 7th May 2016 10:25 am. Edited 2 times in total

You're right there; I have no idea how to get a good finish from a spray can! I'm always impressed where people can

I was going to try a few local paint shops to see what they charged  North Wales Land Rover Club

1984 90 undergoing full restoration.