Hi all,

Does anyone know if there is a diagnostic mode on the Freelander 2 sat nav screen similar to that available on the D3/RRS?

Martin

you have a PM Former Mod/Member, with the most post & Chicken George Arch nemesis

Did you give Martin the info NP, or ask him on a date?

Do share.....

 Former Mod/Member, with the most post & Chicken George Arch nemesis

Thanks to npinks, I will share once I've checked it all out and determined whether it's safe or not

Martin wrote:

Thanks to npinks, I will share once I've checked it all out and determined whether it's safe or not

Looks dangerous.
If it's not safe maybe you should delete half of his posts  FREELANDER 2 TD4 SE (XS UK) IZMIR BLUE SIDE STEPS COLD PACK BI-XENON TINTED WINDOWS - AND PROUD OF HER

Can I ask why it appears to be 'unsafe' to share this information?

I am sure I had seen the code to get into the diagnostic screen on this forum a few weeks earlier. Despite a thorough search of the forum I could not locate that post. Has it been deleted?

Anyways, I have 'rediscovered' the method and the pin code to access the diagnostic screen. I am happy to share this info if the site admin have no objections.

What informations does the iagnosticmode give?
Are they related to the satnav only or car? FREELANDER 2 TD4 SE (XS UK) IZMIR BLUE SIDE STEPS COLD PACK BI-XENON TINTED WINDOWS - AND PROUD OF HER

Guys I'm going to share the Sat Nav codes, mods can remove the post if they wish.
Please remember that I am not responsible if ANYTHING AT ALL goes wrong while you are trying this.

First enter the Menu screen (opens after you press 'agree' to LR's disclaimer or press the 'menu' button in the left-hand corner).
On the menu screen press the center of the top bar for 5 seconds. This is where the hidden button is located.
See pic below:

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Fiddled with the diagnostic screen after entering the 660 code...
Pressed "Loading".. it asked "Load program?" and I confirmed "Yes"..

Now the nav does not work anymore.
Switched off and on ignition and everything but each time the nav starts, the button "Navigation" in the main menu grays out after 3 seconds.
I can press "Settings" and screen saver and it responds, but navigation is grayed out and inactive.

Beggin' for help...

you have a PM

when i type it Former Mod/Member, with the most post & Chicken George Arch nemesis

as HOJU has posted pressing the wrong buttons can cause problems with the SATNAV functionality

The information posted is used at your own risk!!!

I would suggest it is not used unless you know the outcome!

DO NOT USE THE LOAD PROGRAM, function

I hope you get this problem sorted out asap

and welcome to the forum, I wish it was under better circumstances  Former Mod/Member, with the most post & Chicken George Arch nemesis

Hi, Does anyone know whether it is possible to change the odo reading to km's?

Thanks mole

Well, today my nav did fix itself...

I was driving normally when suddenly the nav screen turned black. I stopped the car, turned ignition off, restarted and voila, nav is working!!

Puhh... now lets see what the other buttons in the diagnostic menu are for...

Guess you don't need the private message i sent you then  Former Mod/Member, with the most post & Chicken George Arch nemesis