Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Australia & New Zealand > DAB+ MY15 OE Retrofit - COMPLETED!! |
|
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
In short Yes! The trial format was called "eureka". The problem being is that because digital broadcast is relatively new compared to AM/FM etc that available band width varies from country to country which untimatley dictates the format of DAB. In some countries like US and Japan satellite radio is popular. In the US the digital service is called "Hybrid Digital (HD)" as DAB broadcast band width has been limited due to Band widths reserved for Military use only. From my understanding anyhow. Here in Australia there was also a limiting factor for the broadcast of digital signal, not sure if that's been Changed recently with adoption of DAB+, if it Truly is? From what my research has led me to believe that here in Australia that only the diversity antanae is required to procees the digital signal, this being the AM/FM loops in the rear screens with DAB amplifier. The DAB ECU switches to which ever arial is receiving best signal. This is because here in Australia no DAB signal is broadcast over the L-Band frequency. Apparently signal is primarily transmitted on VHF Band III similar to digital TV.
|
||
17th Dec 2015 5:14 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Pass Through Interface ordered!
|
||
18th Dec 2015 12:49 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
http://www.wohnort.org/dab/australia.html
|
||
20th Dec 2015 6:42 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
|
||
22nd Dec 2015 2:12 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Donor door wiring loom has arrived so I guess I will be busy over Christmas unpicking the loom and cataloguing wire diameters against the corresponding door wiring schematic - fun fun fun!!!
|
||
23rd Dec 2015 8:43 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
|
||
24th Dec 2015 11:58 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
|
||
27th Dec 2015 2:29 am |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4906 |
While you have the car ripped apart it is probably worthwhile upping acoustic insulation. I can't imagine going through this whole exercise a again!
|
||
28th Dec 2015 3:21 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Luckily everything is all contained on the one location, drivers side rear cargo area so not a great deal of "ripping car apart" thank god Main hassle will be headlining but I'm hoping that I'll only have to semi-drop to get to DAB amplifier, Dome doesn't even need replacing.
|
||
28th Dec 2015 4:51 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
First plug done for the DAB ECU. This is the power and ground to the unit. I managed to match OE specification thickness, 0.75 from the donor wiring harness but not the colours so I've used heat shrink to the major colour of each, ie Blue for the + feed and black to ground.
|
||
2nd Jan 2016 2:47 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Now that the Hi-Line to Premium audio is complete this is going to be even easier!
|
||
9th Jan 2016 12:33 pm |
|
Cambo Member Since: 08 Mar 2014 Location: Sydney, Australia Posts: 408 |
There are now several countries using DAB+ not just us. Good news it seems that JLR updated their hardware/software for the 2013MY vehicles to work with DAB+ Some info here http://newsroom.jaguarlandrover.com/en-in/...es_270612/ And the most recent local info regarding DAB+ http://www.digitalradioplus.com.au/dab-in-vehicles The module Stu has is from a 2014MY Jag XF, so it's going to be a DAB+ compatible one. But any JLR vehicle prior to 2013MY won't be DAB+ compatible, I suspect it might not be possible to upgrade an earlier car either, given the hardware differences when the Meridian sound was introduced for the 2013MY. 2008 Freelander 2 HSE Si6 Black/Black - Hers 2009 Jaguar XKR 4.2 S/C Portfolio 2005 Jaguar XJR 4.2 S/C Black/Cranberry 2005 Jaguar X-Type 3.0L AWD - Gone |
||
22nd Jan 2016 12:32 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Phew! Thanks for the research Cambo Feeling better now
|
||
22nd Jan 2016 3:21 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
On the home stretch now, just got to drop in coax cables to be terminated with correct black and violet Fakra plugs.
|
||
25th Jan 2016 1:49 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis