I reckon i'm missing something simple here but how do you open or close the windows without the engine running with the key fob fully engaged? cheers

Freelander 2 TD4 2010

Just turn the ignition on without starting the engine.
Press the start button without pressing brake pedal in if auto or clutch in if manual. MY13 HSE LUX Aintree Green
MY57 SE Stornoway Grey. Gone
Nissan X Trail
Discovery V8 LPG
Series II Land Rover

i have the fob in the ignition fully with everything on but no window power. Start the car and they work as they should.

yes, your correct. Thanks a heap. Simple but i could not see it.
This is when forums are invaluable

 MY13 HSE LUX Aintree Green
MY57 SE Stornoway Grey. Gone
Nissan X Trail
Discovery V8 LPG
Series II Land Rover

Thanks for this. I was wondering as well.

My windows also need to be constantly pressed to open/close no one click open/close like every other car I have owned?

FL2 TD4 GS 08
thanks if you can help

Press the window switch and hold all the way down and hold for 3 seconds, press it all the way up and hold for 3 seconds repeat on all 4 windows and the one shot opening should be restored.

If the battery has been connected then the windows need resetting. Either look in the manual or there are threads on here describing how to do this, takes seconds to sort out.

thanks, will give it a go in a mo and let you know.

Well all other windows work fine, just the drivers one. I tried open, then hold 3 seconds and now it opens/closes a little then wait 2 seconds then do it again it takes about 2 mins to O/C now

2 mins to open/close is a long time either the motor is on it's way out or the glass is tight in the runners have a look to make sure the window runners are clean

I have left it now, its a bit cold and damp now and that may play a part. I have left the instruction in the car to have a look in the morning.

Dont think its the motor as it was fine. I think its the reset process and I have just not got the sequence correct..I hope.