Please can you help. Every time someone else drives my car and I try to recall my saved seat and mirror position, it doesn't seem to work. It seems like my memory position gets overwritten and lost. My car has just been serviced and when I pressed memory 3 to recall the position it was nothing like my stored position. It generally takes a few days of minor adjustments to get my seat just right so I am keen to avoid this happening again. I drive 300 miles each week to work and back then a bit more as I love driving the car.
Thanks in advance. I am following the instructions to the letter ie press memory then 3 but it seems to remember the lseat position used by the last person who drove it. Can you tell me how to stop my position being overwritten when someone else drives
Thanks Freelander 2 Metropolis 64 in Loire Blue with Ivory Windsor Leather. Previously Range Rover Evoque PureTech for 3weeks. Freelander2 XS and Freelander2 S.

Er.....pressing "Memory" and then a button simply stores the CURRENT seat/mirror position into that memory slot.

If you want to recall a previously set position, just press the numbered button. (ie without pressing "Memory").

Try pressing and holding the seat position button, if I press mine it doesn't always go to the preset, if I press and hold it does seem to go to the correct position.
Of course, if however else, is driving and the press the memory button then the others it will overwrite the settings.

Just another thought ... It's not dependant on which key is used is it?

Yes - its key dependant.

But if the OP is pressing "Memory" and then a number, all he is doing is simply overwriting whatever is currently set with the current mirror/seat position.

As you say Taz - if whoever is servicing it doesn't understand how the seat works, then they may be pressing "Memory" and a number in an effort to try and restart it to the owners driving position - but all they're doing is wiping whatever was set there before....

Keys, that's why mine changes then

I wondered about his wording and the way he presses the buttons but gave him the benefit ... Let's see what he comes back with

I just hope his forum name is not his day job.

The seat memory & easy entry/exit feature seem to have a mind of their own as it often doesn't go back to the position it was set as once you close the door & start. The Evoque does the same or at least the one I had did. This was one of the reasons when I ordered my second Evoque I left it as manual seats. (Past) Freelander 2 HSE 2010 MY In Rimini Red.
(Past) RR Evoque Dynamic Lux Si4 In Firenze Red.
(Past) RR Evouque Pure Tech in Barollo Black with bespoke Firenze Red colour coding.
(Present) Freelander Metropolis 2015 MY In Santorini Black with Ivory Premium Leather.

Steve D wrote:

I just hope his forum name is not his day job.

 MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

The Valeter wrote:

The seat memory & easy entry/exit feature seem to have a mind of their own as it often doesn't go back to the position it was set as once you close the door & start. The Evoque does the same or at least the one I had did. This was one of the reasons when I ordered my second Evoque I left it as manual seats.

Mines never worked from new don't know if I should mention it as don't want any dealers prodding around etc! Tbh I will never use it but it's a shame it's never worked  MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

I’ve looked in the handbook about the easy exit/entry seats and cannot seem to find any information? Can anyone find it and give me the page number please? MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

P13
People also need to be aware that memory recall/setting will not work unless Vehicle is stationary. It’s a safety thing
The CAN signals are blocked when car detects movement. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

it will work if moving, but you have to keep the button pressed in until it reaches its memory position, 2009 model, no dpf

Stuartc wrote:

P13
People also need to be aware that memory recall/setting will not work unless Vehicle is stationary. It’s a safety thing
The CAN signals are blocked when car detects movement.

 MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

I note that, still, nobody has come up with the PUBLISHED instructions / explanation of the Easy Entry function of the FL2 Memory Seats.
As shown, P13 does not show the function. I am sure that if I knew what to expect and I would be able to get mine working reliably to the memorised positions. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 77k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)