I bought a couple of LED sidelight bulbs today. When I fitted them they flickered.
I have been told I need 'error free' bulbs. What is the difference, and can the
ones I've got be adapted somehow?  2013 Dynamic Santorini black
2011 XS Lago grey
2007 HLS Stornoway grey
sometimes towing an Elldis AVANTE 574.

http://www.advancedfactors.co.uk/01-led--smd-products-250-c.asp

You can buy resistors to "slow" the signal down that will stop the flicker, but Canbus bulbs (resistor already fitted) are cheaper than the resistors! Paul Redding
+44 (0)23 8052 2760
Order Parts Online at www.advancedfactors.co.uk

Thanks Steve. Will see if I can swap them.  2013 Dynamic Santorini black
2011 XS Lago grey
2007 HLS Stornoway grey
sometimes towing an Elldis AVANTE 574.

Canbus LED's work fine. But, I had a set of "white" lamps taken out and replaced by an MOT tester as they appeared too "blue" when compared with the H7 Osram Nightbreakers in the dip and main beam. So I just spend 10 minutes before and after MOT tests swapping the LED's out and in.

That would mean BossBob that all Citreon DS3's will fail their first MOT given the brightness of their side lights compared to the yellow of their dipped.

Just telling it how it happened. I'd chosen the whitest LED's I could find but the halogen nightbreakers still look slightly yellow when directly compared.

I've got night breakers and the LEDs now appear too white any suggestions for replacements for the LEDs