BlackLR, look in your private messages RalphK Ralph
Zurmatt Silver, Diesel, Automatic, side steps, mud flaps, mats, boot liner, TomTom Start 60 installed, rubbing strips, removable Brink tow bar, after market tinted glass, front styling bar, Rear spoiler, Motorlicious tail pipe trim. Wood Company centre armrest

Is this the styling cover you are talking about?



Looks better with the lamp guards. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Andy131 wrote:

Is this the styling cover you are talking about?



Looks better with the lamp guards.

sambuca wrote:

i was looking on ebay and have came across the chrome styling strip for the front bumper which will cover my damage what would people reccomend realy dont no what to do lol

Rowy wrote:

sambuca wrote:

i was looking on ebay and have came across the chrome Styling strip for the front bumper which will cover my damage what would people reccomend realy dont no what to do lol

Chrome is for gypo's only!
Not responsible people who care about the reputation of Freelanders

I think you can get sued for slagging off gypo's these days, watch out or you might have 1/2 ton of old tarmac piled on yours when you go out next,  I was only wrong once and thats when I thought I was but wasnt.

2010 Freelander 2 XS Stornaway Grey
2010 Aston DBS Morning Frost
2010 Bentley Continental Brooklands Green

Ralphk wrote:

BlackLR, I will photo the front of the car for you when I can a little later this week. If your car is black it will look super but my car is Zermatt and whilst I have said that it is not the prettiest thing you will see it does do its job.
You will need to take the front sensors from the front bumper and drill two more holes in the styling cover to place them. There is enough cable to reach forward though. I will post picture asap.

Hi Gman!
Yes there is a requirement to drill holes in the existing bumper to secure the guard. If you remove the guard it will be impossible to cover the locating holes. I have thought about removing mine but frankly the Zermatt Silver with the black front guard and side stripes in my opinion makes it look pretty good Ralph
Zurmatt Silver, Diesel, Automatic, side steps, mud flaps, mats, boot liner, TomTom Start 60 installed, rubbing strips, removable Brink tow bar, after market tinted glass, front styling bar, Rear spoiler, Motorlicious tail pipe trim. Wood Company centre armrest

Thanks Ralphk, think I might just get them painted then, thanks for he quick reply

Hi TheGman, Just wondering if you ever took off the black bumper protector on your FL2? Just bought an FL2 with the protector and am also thinking of removing it without hopefully not to much damage underneath
Thanks!!!

above is the video on how to fit styling cover.

This shows what hole have to be drilled, there are six holes along the top and 4 hole at the bottom, that will be seen once the cover is removed.

Hi 3landertwo, thanks for the link, this is very clear, so for the moment I will leave it on, and perhaps searching for a pair of light grills, which then, I think looks nicer with the cover. Or search myself a FL2 facelift bumper to replace the complete part.