Its a mule, sorry donkey dressed as an Evoque

It's a freelander then  Former Mod/Member, with the most post & Chicken George Arch nemesis

Mav71,
It's only those who've had the privilge of working in the Auto industry who fully understand all the build phases and how 'stick on' panels are deliberately design to fool people. Auto press in particular

I found it best to sit back and read comments/articles which were miles off the mark with great amusement
It's also better for the blood pressure

The only time to sit up and take notice is when some detail that gets out to the Auto rags is correct
Fortunately, that's very rare but always followed by a witch-hunt as to it's origin.
Often followed by a sacking. Another member of the failed FL2 clutch/DMF club, twice.

npinks wrote:

It's an Evoque isn't it

Funny F****er  Freelander 2 HSE Lux 2013MY - Barolo Black with Ivory Leather. Alpine DVD - Privacy -Evoque 20" Dynamic Wheels and more to come.........

 Former Mod/Member, with the most post & Chicken George Arch nemesis

Pegleg wrote:

Mav71,
It's only those who've had the privilge of working in the Auto industry who fully understand all the build phases and how 'stick on' panels are deliberately design to fool people. Auto press in particular

I found it best to sit back and read comments/articles which were miles off the mark with great amusement
It's also better for the blood pressure

The only time to sit up and take notice is when some detail that gets out to the Auto rags is correct
Fortunately, that's very rare but always followed by a witch-hunt as to it's origin.
Often followed by a sacking.

npinks wrote:

It's a freelander then

Even funnier F****er!  Freelander 2 HSE Lux 2013MY - Barolo Black with Ivory Leather. Alpine DVD - Privacy -Evoque 20" Dynamic Wheels and more to come.........

Obviously the prototypes and pre-production models will break cover nearer to the launch date as they have to test them on the highway as opposed to the test track, but would think this will not be until late 2014.
Also would expect the pre-production models to be seen nearer to Liverpool.

Bill T. Life Honorary Member of Wallasey Motor Club.
Licenced MSA Radio Operator for 35+ years.
Rallying is the only sport.

Cut some bloody slack Mav, if we were all perfect like you we wouldn't need half the members, in fact dealers could use the forum for the perfect poster with the perfect answer.

There's s t written about tyres, noises, clutches, glow plugs etc but in between these s t posts are some good ones. If people complained at every thread written we'd need more than two moderators to sort out the anarchy.

Forums are notorious for wrong answers, just rely on peoples intelligence to 'wheedle' out the right ones without insulting them by saying they know 'jack

I wish my replies were all correct in my posts, but they're not, I'm just a mere mortal.

My rant over.

Whoo hoo

Bill Turner wrote:

Obviously the prototypes and pre-production models will break cover nearer to the launch date as they have to test them on the highway as opposed to the test track, but would think this will not be until late 2014.
Also would expect the pre-production models to be seen nearer to Liverpool.

Bill T.

EYorkshire wrote:

Cut some bloody slack Mav, if we were all perfect like you we wouldn't need half the members, in fact dealers could use the forum for the perfect poster with the perfect answer.

There's s t written about tyres, noises, clutches, glow plugs etc but in between these s t posts are some good ones. If people complained at every thread written we'd need more than two moderators to sort out the anarchy.

Forums are notorious for wrong answers, just rely on peoples intelligence to 'wheedle' out the right ones without insulting them by saying they know 'jack

I wish my replies were all correct in my posts, but they're not, I'm just a mere mortal.

My rant over.

That was a good rant, and a fair one!  Freelander 2 HSE Lux 2013MY - Barolo Black with Ivory Leather. Alpine DVD - Privacy -Evoque 20" Dynamic Wheels and more to come.........

Gee thanks