Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Limp mode / error codes question |
|
|
landy19840 Member Since: 13 Mar 2011 Location: Non Posts: 1817 |
Do you have it chipped? |
||
22nd Apr 2012 4:31 pm |
|
RazMan Member Since: 18 Nov 2011 Location: Essexshire Posts: 336 |
Actually I do - but it is a tuning box designed for economy which has done 10k miles without any problems (gives me 40mpg too!). However as a precaution I have removed it to eliminate it as the cause. Cheers, Raz FL1 TD4 GS Auto 2001 Silver FL2 TD4 Auto 2007 Black FL2 XS SD4 Auto 2012 Fuji White Last edited by RazMan on 22nd Apr 2012 4:51 pm. Edited 1 time in total |
||
22nd Apr 2012 4:33 pm |
|
landy19840 Member Since: 13 Mar 2011 Location: Non Posts: 1817 |
All those fault codes sound like like it chip related, over fuelling, air flow issues. I had this with mine, in the end removed remap and cleared codes and it was all fine! |
||
22nd Apr 2012 4:40 pm |
|
RazMan Member Since: 18 Nov 2011 Location: Essexshire Posts: 336 |
Thanks for the tip - I will keep the tuning box off for a week or so and see if the faults come back. Do you know if it is possible to clear the existing faults without any specialist equipment or is it something I need to get the dealer to do for me? Cheers,
|
||
22nd Apr 2012 9:58 pm |
|
Strathearn Engineering Member Since: 23 Mar 2012 Location: Aberuthven PH3 1HE Posts: 38 |
We have seen a few through our workshops where the little circlip that holds the actuator rod onto the motor, has fallen off, causing P0234 to be stored Strathearn Engineering
|
||
23rd Apr 2012 10:21 am |
|
RazMan Member Since: 18 Nov 2011 Location: Essexshire Posts: 336 |
Thanks for the info SE - I will have a poke around the turbo (if I can get to it) and have a look. Cheers,
|
||
23rd Apr 2012 10:29 am |
|
Cerdo Member Since: 13 Jul 2008 Location: Manchester Posts: 193 |
Mine had a little stutter last Monday, after hoofing up the M6. It was booked in for it's first 15K service on Tuesday, so I asked them to look for it, but there was nothing to report.
|
||
8th May 2012 9:26 pm |
|
RazMan Member Since: 18 Nov 2011 Location: Essexshire Posts: 336 |
I have since done about 200 miles without incident so I am left feeling a bit confused, but have decided to invest in a wifi obd reader for my iphone in case anything crops up again - at least I can hopefully reset it again without the help of the RAC
|
||
8th May 2012 9:46 pm |
|
donny Member Since: 05 Mar 2010 Location: Usually knocking about the north Posts: 215 |
Mine occasionally goes into limp mode with P0234. Its remapped and usually happens when I'm pressing on and its cold/murky/wet - although there's no real pattern to it. I reset with FCR and all is well for another few thousand miles. I have spoken with a few specialists and dealers about it and they all suspect its to do with the change of parameters in the remap. Its not enough of a bother to drop the remap as the extra oomph makes the car for me. |
||
9th May 2012 5:28 am |
|
Mona Geeza Member Since: 22 May 2010 Location: Devon Posts: 1293 |
Mines chipped, it was done at Tesco's |
||
9th May 2012 3:36 pm |
|
Cerdo Member Since: 13 Jul 2008 Location: Manchester Posts: 193 |
Land Rover assist came out today. Turns out the software was updated at the service and this caused the problem. I asked them that when i reported it to the dealer, and they didn't think it had been.
|
||
9th May 2012 10:58 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis