![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Off Roading & Green Laning > Off-road spare parts checklist for the FL2 |
![]() ![]() |
|
|
sro Member Since: 25 Oct 2011 Location: California Posts: 68 ![]() ![]() ![]() |
Does anyone carry spare parts with them when they off-road? In a couple months I'll be venturing out into the Mojave desert and I want to be prepared in to fix anything that might commonly fail on a FL2.
|
||
![]() |
|
Andy131 Member Since: 09 Dec 2009 Location: Manchester Posts: 2187 ![]() ![]() |
Depends on how remote you are going.
|
||
![]() |
|
Ghyllie Member Since: 19 Jul 2011 Location: Over looking Loch Ness with Nessie by my side Posts: 159 ![]() ![]() ![]() |
The most important thing is that people know when you are due back, just in case |
||
![]() |
|
mikehzz Member Since: 04 Sep 2009 Location: Springwood Posts: 749 ![]() ![]() ![]() |
Epoxy filler to plug holes on any tank that might get a hole in it.......and a paper clip, box of matches and complete seasons of McGyver on dvd so you know what to do with them. |
||
![]() |
|
sro Member Since: 25 Oct 2011 Location: California Posts: 68 ![]() ![]() ![]() |
@Andy - funny you mention that. I actually banged up the gas tank pretty badly. Now I believe I need a new fuel tank sender unit but I'm not 100% sure. The gas tank occasionally does wonky things (like read that it's half full when it's completely empty). Installed a hitch, stock roof rack, mantec skid plates, General Grabbers AT2 255/60/R18, and a rear access ladder. Also made a hitch-mount for the winch. Looking to install a front hitch, rooft-top basket, and lift kit.
|
||
![]() |
|
cli Member Since: 02 Aug 2007 Location: Wandering and Occasionally lost Posts: 56 ![]() ![]() |
Banging up your fuel tank isnt a good idea
|
||
![]() |
|
mikehzz Member Since: 04 Sep 2009 Location: Springwood Posts: 749 ![]() ![]() ![]() |
Suspension lift?.....good luck with that. Let me know if you can get one. Cheers |
||
![]() |
|
Andy131 Member Since: 09 Dec 2009 Location: Manchester Posts: 2187 ![]() ![]() |
Occasionally reading half full when empty is the fault mine has - dealer has said it's a new sender time |
||
![]() |
|
sro Member Since: 25 Oct 2011 Location: California Posts: 68 ![]() ![]() ![]() |
Yah, just installed the mantec front & rear skid plates. I'll post photos when I get a chance. I had to cut a decent amount of material out of the rear skid plate to make it fit (and prevent the exhaust from hitting it when I go over bumps). That may be because I'm fitting it on an american car (probably has a slightly different exhaust system).
|
||
![]() |
|
cli Member Since: 02 Aug 2007 Location: Wandering and Occasionally lost Posts: 56 ![]() ![]() |
I owe it to Martas
|
||
![]() |
|
cli Member Since: 02 Aug 2007 Location: Wandering and Occasionally lost Posts: 56 ![]() ![]() |
Round 1 Front Protection Plate
|
||||
![]() |
|
simont Member Since: 15 Feb 2011 Location: Sunderland/Newcastle Posts: 1809 ![]() ![]() ![]() |
|
||
![]() |
|
cli Member Since: 02 Aug 2007 Location: Wandering and Occasionally lost Posts: 56 ![]() ![]() |
Having killed three standard ones before, i figured it was time for something a bit heavier |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)