Does anyone know the torque settings for Freelander 2 brake caliper mounting bolts?

doberover, Sorry I will say it before somebody else dose (FT)

Great to see you on board you will fine the right answer. LAR is always a great help.

all the best

Front:
Brake caliper bleed screw - 8 Nm
Brake caliper mounting plate to wheel knuckle bolts* - 200 Nm
Brake caliper guide pin bolts - 28 Nm
Brake disc dust shield bolts - 10 Nm
Brake disc Torx screw - 35 Nm
Brake flexi hose union to caliper - 32 Nm
Brake hose retaining bracket to damper bolt - 22 Nm

Rear:
Brake caliper bleed screw - 10 Nm
Brake caliper mounting plate to wheel knuckle bolts* - 110 Nm
Brake caliper guide pin bolts - 30 Nm
Brake disc dust shield bolts - 13 Nm
Brake disc Torx screw - 35 Nm
Brake flexi hose union to caliper - 15 Nm
Brake hose retaining bracket to damper bolt - 22 Nm

*Always fit new nuts/bolts.

alex_pescaru

Bit off topic but I was wondering if other members have a noise coming from the front brakes when stopping and again when releasing the foot brake peddle, bit hard to describe sound like an "urh" the loaner I had on service had a similar sound but less audible, maybe it's normal?

I'm driving an TD4 HSE auto 2008...

the brake caliper to wheel knuckle bolts - are these the main bolts that screw the caliper body to the suspension arm? do they need replacing every time you undo them?

I have 2011 HSE sd4 and also have the same problem. Sometimes it goes away on its own but do come back in due course. Workshop said this is normal for new car ( just have 3000 km) .

Will really be interested in the solution if anyone has. Free bird

When you buy these, do they come with the replacement bolts and clips?
When I ordered rear ones they did.

Just wondered.

Thanks in advance

Alan MY10 TD4.e HSE
Bali Blue

I've changed the rear brake pads and discs on mine and the torque setting I used is simply "tight"

I also have the noise from the front brakes sometimes MikeC, I think it's normal.