Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > heated steeringwheel |
|
|
Mounty Member Since: 26 Jan 2008 Location: Switzerland Posts: 20 |
Is it possible to have this for the Free 2? Daniel |
||
18th Jan 2012 2:57 pm |
|
ad210358 Member Since: 12 Oct 2008 Location: Here and There Posts: 7464 |
I am sure i've heard on here that you won't be able to fit a Disco or RR steering wheel, different splines |
||
18th Jan 2012 5:55 pm |
|
MANUFAN Member Since: 10 Dec 2011 Location: Manchester Posts: 357 |
You can however fit a pair of woolly gloves |
||
18th Jan 2012 6:33 pm |
|
MightyMildred Member Since: 16 Jan 2011 Location: County Durham Posts: 331 |
Ahhhhhh heated steering wheel. Disco4 I had last winter had one. Wish it was a Freely option.
|
||
18th Jan 2012 7:02 pm |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
i just put a pair of gloves on, keeps your hands warm when de-icing the car
|
||
18th Jan 2012 7:16 pm |
|
athelstan Member Since: 03 Nov 2009 Location: Reality Posts: 2658 |
The first winter her Ladyship had her FL2 she said that she wished it did have a heated steering wheel - 05:00hrs start to drive to the hospital at these altitudes makes for a steely ice cold steering wheel. So as a caring man-about-the-house I did promise back then that if I ever discovered that "heated" was available I'd get one fitted for her. |
||
18th Jan 2012 7:32 pm |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20090 |
better buy her some gloves then
|
||
18th Jan 2012 7:55 pm |
|
lad Member Since: 26 Nov 2009 Location: Blackburn Posts: 129 |
As ad says it has different spines, the D3/4 wheels have spines and the freelander is hexagonal. |
||
19th Jan 2012 12:02 am |
|
athelstan Member Since: 03 Nov 2009 Location: Reality Posts: 2658 |
Question: Is it practically possible to replace/swop the spine |
||
19th Jan 2012 7:18 am |
|
chicken george Member Since: 05 Dec 2007 Location: N. Yorks Posts: 13289 |
Im sure a good engineer could do it, also I could probably bodge it in my farm workshop( wheel may fall off occasionly carry a hammer ), if the fl2's shaft is smaller than the discos wheel then a simple adaptor could be made At work
|
||
19th Jan 2012 8:32 am |
|
athelstan Member Since: 03 Nov 2009 Location: Reality Posts: 2658 |
That's very useful data CG.
|
||
19th Jan 2012 8:36 am |
|
EYorkshire Member Since: 18 Nov 2010 Location: (!) Posts: 4392 |
I would say no, the steering wheel relies on a 'slipring' affair so the wiring loom will not be constantly twisting itself, as the freelander does not 'do' heated steering wheels the loom nor the 'slipring' affair would not have this facility. Therefore the incorporated slipring socket would not be compatible with the Disco plug. |
||
19th Jan 2012 8:50 am |
|
dunroof Member Since: 24 Nov 2010 Location: <> Yes, still being stalked by another member! Posts: 1785 |
|
||
19th Jan 2012 8:51 am |
|
MartynB Member Since: 08 Aug 2011 Location: Currently Rootless ! Posts: 1781 |
Nothing is impossible, if you have access to a machine shop and a decent tig welder, and have the money and the mind to do it but to buy a £400/£600?? steering wheel and the front cover and possibly the airbag, modify it etc, perhaps canabalise the original, then make sure that you have done the mounting job to a few microns, ensure that the depth front to back is the same and the plastics /leather match ensure that the wiring for all the wheel mounted controls and airbag from the disco/rr match the freelander ( and work ) plus then you do not have to the feed to power the heating elements fit the switches control gear etc etc, and at the end you have a non standard car, that a dealer will not touch,with non standard wiring , and probably at the end you have a happy wife but you have voided your warranty by about with a safety critical part .....
|
||
19th Jan 2012 8:52 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis