Hi Guys, I have bought some side steps on eBay and have to admit that I havent a clue how they fit to the FL2. I understood from the seller that I need to install 6 Rivnuts but that is about it
Can anyone give me any pointers? Here's a couple of pics to help with any explanations

 Cheers,
Raz
FL1 TD4 GS Auto 2001 Silver
FL2 TD4 Auto 2007 Black
FL2 XS SD4 Auto 2012 Fuji White

Search Rivnut on here there is loads of info. It is a captive nut that fits in the sill under the plastic covers, no drilling needed.
Should take about an hour

might take more than an hour to sort out those odd brackets. search on side tubes threads re rivnuts At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

The brackets on the steps in the photo look OK, the extra brackets in the lower photo don't look like anything connected with the side steps, unless they stick out 12" from the side of the car

I will second Taz's comments, they look different to the fitting kit on the genuine ones.
You can try here for fitting instructions of the genuine ones.

http://topix.landrover.jlrext.com/topix/se...;view=FitH

Thanks for the replies - I think I might have it sussed now.
The steps appear to bolt up to four existing holes in the sills (need a M8 rivnut tool) and then the long brackets go inboard and bolt onto the chassis rails (more rivnuts) creating a brace effect.
I havent a scooby what the strange L shaped brackets do though  Cheers,
Raz
FL1 TD4 GS Auto 2001 Silver
FL2 TD4 Auto 2007 Black
FL2 XS SD4 Auto 2012 Fuji White

Braces for side steps My god, your not supposed to stand on them They are there for fancy!!!