Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Australia & New Zealand > Recovery gear |
|
|
Liberty555 Member Since: 05 Jul 2010 Location: Perth Posts: 62 |
Hi - I put a photo in my Gallery of me getting dirty the week before last…
|
||
18th Aug 2011 8:00 am |
|
spelchek Member Since: 12 May 2010 Location: Australia Posts: 35 |
Thanks Liberty. The 'Staun deflators' - never heard of them. Just did a quick google but can you explain how you use them?
|
||
18th Aug 2011 8:34 am |
|
Liberty555 Member Since: 05 Jul 2010 Location: Perth Posts: 62 |
You got it in one.
|
||
18th Aug 2011 11:43 am |
|
spelchek Member Since: 12 May 2010 Location: Australia Posts: 35 |
We had (still have in the garage, actually) the 19's with the Conti's too. I would never have been game to let them down to 18psi tho - I would have thought they'd peel strait off the rim at that pressure. Learn something new every day, dontcha!
|
||
18th Aug 2011 1:00 pm |
|
AiiEEX Member Since: 30 Sep 2010 Location: Norfolk way Posts: 642 |
Trying not to get off topic, I just wish to confirm that you are talking about the Continental Cross Contact UHP tyres?
|
||
18th Aug 2011 2:22 pm |
|
spelchek Member Since: 12 May 2010 Location: Australia Posts: 35 |
Yep, they're the ones. |
||
18th Aug 2011 3:03 pm |
|
mikehzz Member Since: 04 Sep 2009 Location: Springwood Posts: 749 |
I go off road a lot, I've got the "bush pinstripes" to prove it. Gear includes snatch strap, exhaust jack, shovel, stauns, air compressor, hand winch plus extension strap and for Outback trips tyre plyer kit to be able to completely change a tyre. The stauns are great, I have mine set 2 at 24psi for gravel roads and forest tracks and 2 at 15psi for beach/dune work.
|
||
18th Aug 2011 4:37 pm |
|
Liberty555 Member Since: 05 Jul 2010 Location: Perth Posts: 62 |
Quite honestly if you drop the pressure to 18psi at a petrol station by the compressor you can hardly tell thry are deflated. They are better than you might think. |
||
18th Aug 2011 9:58 pm |
|
Liberty555 Member Since: 05 Jul 2010 Location: Perth Posts: 62 |
Thanks for the tip on using mud and ruts to back out. I once went from a soft and boggy area into very soft beach sand without changing modes and by the time I'd realised it, I was already up to the axles. Some digging and swearing and it was back on track!
|
||
18th Aug 2011 11:55 pm |
|
jaksbak@freel2 Member Since: 26 Dec 2010 Location: Fraser Coast Posts: 225 |
I've got the usual snatch strap, shovel etc but splashed out on a set of MaxTraxs. Coincidently haven't been able to get stuck to test them, despite some serious efforts. They were on special at $259 or something, not cheap good for peace of mind. I also bought a $20 ski-board bag at Aldi to store them in. Sounds like I should invest in those Stauns though. Bridgestome A/T's on 17" alloys helps keep me out of trouble. |
||
19th Aug 2011 11:58 am |
|
spelchek Member Since: 12 May 2010 Location: Australia Posts: 35 |
Jak - do the Maxtracks fit in the back of the FL2 ok?
|
||
19th Aug 2011 12:13 pm |
|
mikehzz Member Since: 04 Sep 2009 Location: Springwood Posts: 749 |
Yes the stauns are a to set through trial and error really and they have a locking ring you tighten to hold the setting. I use them to get down close without having to hunch over and check all the time then use a pressure gauge for accuracy once they finish. Much quicker. |
||
19th Aug 2011 2:19 pm |
|
jaksbak@freel2 Member Since: 26 Dec 2010 Location: Fraser Coast Posts: 225 |
MaxTraks are only 1200mm long and about 300mm wide so no dramas fitting in the back somewhere. I almost always have at least one of the back seats folded down, so plenty of room. Easy to strap to roof rackks too if you have them. |
||
20th Aug 2011 9:14 am |
|
spelchek Member Since: 12 May 2010 Location: Australia Posts: 35 |
No roof racks and three kids in booster seats. Not much chance of putting the back seats down At least i can fit em in the boot. |
||
20th Aug 2011 9:43 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis