![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Brake pad and disc thickness |
![]() ![]() |
|
|
snairda Member Since: 25 Feb 2007 Location: Kent Posts: 45 ![]() ![]() ![]() |
Replaced front discs with the pads on the front as the discs seem to wear quite a bit, although I let pads get down to about 2mm. First set of pads/discs on front lasted 40,000 miles. Rear pads replaced at 40,000 miles as well, but left discs as seemed okay.
|
||
![]() |
|
seagull1 Member Since: 23 Jan 2011 Location: Loughborough Posts: 327 ![]() ![]() ![]() |
I had difficulty finding that info, but as I under stand the following should be correct.
|
||
![]() |
|
superspark Member Since: 24 May 2009 Location: Devon Posts: 877 ![]() ![]() ![]() |
look on the outer edge of the discs. arround the edge you should see the run out groves, these are the max limmit of wear and should be changed. |
||
![]() |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4642 ![]() |
Yes, these are exactly the figures that workshop manual states. I will add, just for 3.2L gasoline version, Rear disks new: 20mm, min: 18mm. Thanks for posting the info. |
||
![]() |
|
crazynight Member Since: 25 Jun 2011 Location: UK Posts: 2 ![]() ![]() |
Thanks Richards thats exactly what i was looking for...next question where can I get a workshop manual from? |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)