![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Advanced Factors > Front hub bearing and upright |
![]() ![]() |
|
|
Advanced Factors Site Sponsor Member Since: 31 May 2013 Location: Southampton Posts: 160 ![]() ![]() ![]() |
Good Afternoon,
|
||
![]() |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 232 ![]() ![]() ![]() |
What brand is that?
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
Was £105 + vat for just the hub? Or for both hub and knuckle ?
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
Bob- AF dont supply the combined unit (I rang them just to check). But Craddocks (£200) and Island4X4 (£170) do . https://www.island-4x4.co.uk/drivetrain-wh..._2853.html Jules |
||
![]() |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2737 ![]() ![]() ![]() |
Thanks Jules think the complete item is the easiest option, don't want to mess about with pressing bearing in and out, the dedicated hub puller would be ideal but for diy use can't justify cost. Landrover - turning owners into mechanics since 1948
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
You may want to consider also getting knuckle bolt LR000073 and drive shaft retainer bolt LR000577 from AF though. Not expensive. Jules |
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
Also a lower arm ball joint extractor is worth having or there is a workaround in the movie from 4.05 on but not tried it myself
|
||
![]() |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 232 ![]() ![]() ![]() |
It was for the hub and knuckle. FL2 SD4 XS 2013 Orkney Grey |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
looks straight forward Jules |
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
Jules The movie as you can see is of a Volvo, the Hub and bearing come out together, however on the Freelander there is a circlip preventing this. The hub comes out with part of the bearing. The part left in then needs to be either pressed or drawn out. So I think you need two different types of kit one to pull the hub and one to pull the bearing. |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
Thanks.
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4817 ![]() ![]() ![]() |
I think Im just going to get the knuckle/hub assembly and change the lot. Jules |
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1513 ![]() ![]() ![]() |
Odd My Manual shows a circlip. It says that the bearing will be damaged on removal
|
||
![]() |
|
Lakelander Member Since: 07 Nov 2019 Location: Cumbria Posts: 232 ![]() ![]() ![]() |
Rechecked and the £105 I paid was for the hub complete with bearing but not the knuckle. Apologies. FL2 SD4 XS 2013 Orkney Grey |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)