HI All

I recently bought a 2007 Freelander HSE with 107k mileage and fsh as a second car - the garage had put on a replacement second hand subframe which is fine but I would like to remove it to clean it up and also clean up the underside around it as it all has surface rust and I would like to get a good 5 years out of the car - is there anything to look out for or any specialist tools needed - it all looks fairly simple and i would like to do it while it is still all fresh from being fitted and not any siezed bolts etc

thanks

will

I had a garage renew mine but all I will suggest on replacement put lots of grease maybe look at something like Lanoguard on the out runner arm bolts and have the tracking checked then re grease again

I answered on the other forum, but you've not even been back on to read the answers given. Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, my daily driver.
1972 Hillman Avenger GT, the project.

A decent torque wrench 2009 FL2 S now gone
2011 FL2 HSE AUTO
2012 FL2 XS AUTO
2000 Kawasaki er 5

ok thanks I have looked it up the manuals cheers it looks fairly simple