Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Oxygen sensor no LR001459 |
|
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
bit more searching says diesels don,t have oxygen sensors, so why is it coming up om my Autel.
|
||
1st Nov 2022 5:04 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
If the O2 sensor is giving a code, then it's outside the ECM's ability to compensate for age.
|
||
1st Nov 2022 5:18 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4999 |
Maybe not old diesels but the FL2 does. See Page 1238 of freebie JLR manual, item no 8 And pages 1260,1261 It says a special tool is required - you cant use a socket because of the wire coming out of its top and sometimes the sensor is in a recess preventing a spanner from the side - doesnt look it from the pic though. Jules |
||
1st Nov 2022 6:09 pm |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
I removed the plenum panel and the ECU to get at the O2 sensor. You will likely need heat to remove I did.
|
||
1st Nov 2022 6:32 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
Thank you all for the free and excellent advice.
|
||
1st Nov 2022 6:37 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
Chips, I now have to get any major work done at my local garage.
|
||
1st Nov 2022 6:40 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
A garage will use an O2 sensor socket, which has a cutout designed to accommodate the sensor wiring.
|
||||
1st Nov 2022 7:53 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4999 |
I replaced 2 O2 sensors on my FiL's Corsa the one on the exhaust manifild was an absolute sod.
|
||
2nd Nov 2022 9:05 am |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
Cylinder 2 is shiny because I glaze busted the bore before fitting a replacement piston. The piston in there had been mashed by a nut that a previous (I won't call him a mechanic ) had dropped into the intake. The piston looked like this.
2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||||
2nd Nov 2022 2:39 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
This code only showed up this week.
|
||
2nd Nov 2022 4:41 pm |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
No problem driving it, if you are getting it fixed |
||
2nd Nov 2022 7:36 pm |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 437 |
latest-- vibration cured by replacing OS brake caliper.
|
||
5th Nov 2022 4:34 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis