![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Oxygen sensor no LR001459 |
![]() ![]() |
|
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 448 ![]() ![]() ![]() |
bit more searching says diesels don,t have oxygen sensors, so why is it coming up om my Autel.
|
||
![]() |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2086 ![]() ![]() ![]() |
If the O2 sensor is giving a code, then it's outside the ECM's ability to compensate for age.
|
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5162 ![]() ![]() ![]() |
Maybe not old diesels but the FL2 does. See Page 1238 of freebie JLR manual, item no 8 And pages 1260,1261 It says a special tool is required - you cant use a socket because of the wire coming out of its top and sometimes the sensor is in a recess preventing a spanner from the side - doesnt look it from the pic though. Jules |
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1569 ![]() ![]() ![]() |
I removed the plenum panel and the ECU to get at the O2 sensor. You will likely need heat to remove I did.
|
||
![]() |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 448 ![]() ![]() ![]() |
Thank you all for the free and excellent advice.
|
||
![]() |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 448 ![]() ![]() ![]() |
Chips, I now have to get any major work done at my local garage.
|
||
![]() |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2086 ![]() ![]() ![]() |
A garage will use an O2 sensor socket, which has a cutout designed to accommodate the sensor wiring.
|
||||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5162 ![]() ![]() ![]() |
I replaced 2 O2 sensors on my FiL's Corsa the one on the exhaust manifild was an absolute sod.
|
||
![]() |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2086 ![]() ![]() ![]() |
Cylinder 2 is shiny because I glaze busted the bore before fitting a replacement piston. The piston in there had been mashed by a nut that a previous (I won't call him a mechanic ![]() ![]() The piston looked like this.
2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||||
![]() |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 448 ![]() ![]() ![]() |
This code only showed up this week.
|
||
![]() |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1569 ![]() ![]() ![]() |
No problem driving it, if you are getting it fixed |
||
![]() |
|
janderson41 Member Since: 11 Mar 2012 Location: Howwood Renfrewshire Posts: 448 ![]() ![]() ![]() |
latest-- vibration cured by replacing OS brake caliper.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)