Freel2.com - View topic - Cooling fan stays on


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Cooling fan stays on

Page 1 of 1

Print this entire topic ·

FatBoyDrunk

Member Since: 30 Jun 2016
Location: Cape Town
Posts: 1

2007 Freelander 2 TD4 S Manual Santorini Black

Cooling fan stays on

Hi
I have a Freelander 2 2007 TD4.
The cooling fan stays on all the time even with the engine off. It is only the bottom fan that stays on.
It seems to have started (I think) after I did an oil change. Which in the process I had to move the fan controller out the way to access the oil filter.

Any help would be great, thanks

12th Jan 2022 6:54 pm

MotionInc

Member Since: 17 Jun 2019
Location: North America
Posts: 1355

I would suggest checking all connections on the fan controller module and harness and reconnecting it, also replace the fuse that controls it. You can also try a hard battery reset (do a search on this site). If that doesn't work, I'd try a wrecker for a replacement module as I am not sure if the controller is sold separately.

12th Jan 2022 7:35 pm

merlinj79

Member Since: 13 Aug 2019
Location: San Diego
Posts: 315

^^^ If that doesn't work, look up the cooling system in the shop manual.

There may be a temp sensor on the radiator or nearby plumbing... if that got damaged that might cause odd fan behavior too. Probably easy to test it in place with a meter (test cold, and then warm up the vehicle to test hot).

13th Jan 2022 3:28 pm

jules

Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5010

2014 Freelander 2 SD4 SE Auto Firenze Red

Re: Cooling fan stays on

FatBoyDrunk wrote:
Hi
I have a Freelander 2 2007 TD4.
The cooling fan stays on all the time even with the engine off. It is only the bottom fan that stays on.
It seems to have started (I think) after I did an oil change. Which in the process I had to move the fan controller out the way to access the oil filter.

Any help would be great, thanks

FWIW I've never needed to move anything fan related to change the oil filter on the TD4- but a flexible ratchet spanner is essential. Jules

13th Jan 2022 4:36 pm

Geobloke

Member Since: 03 Nov 2018
Location: Darkest Denbighshire
Posts: 130

2008 Freelander 2 TD4 HSE Manual Zermatt Silver

Re: Cooling fan stays on

FatBoyDrunk wrote:
Hi
I have a Freelander 2 2007 TD4.
The cooling fan stays on all the time even with the engine off. It is only the bottom fan that stays on.
It seems to have started (I think) after I did an oil change. Which in the process I had to move the fan controller out the way to access the oil filter.

Any help would be great, thanks

Had the reverse of your problem. Corroded wire breaking the circuit. Could be possible you have a short that is providing constant 12v tot he fans. Could also be a faulty sensor as said.

13th Jan 2022 5:27 pm

gasman

Member Since: 02 May 2013
Location: Tyneside
Posts: 893

2009 Freelander 2 TD4_e GS Manual Zermatt Silver

Check the fan module control wire, think it is a small violet wire. I can cause issues with the fans if broken or grounded out. Now at the point when I learn something new something old is lost out the other side !
Now retired so it doesn't matter anymore.
Freelander now gone.

13th Jan 2022 7:51 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum