Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Maintenance & Modifications > How should these cable harnesses be routed? |
|
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 |
I was checking stuff under the bonnet today and noticed some of the wiring harnesses under the airbox don't look quite right.
|
||
21st May 2023 4:58 pm |
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 |
Ok, I think I can answer (at least part of) my own question.
|
||
21st May 2023 6:02 pm |
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 |
Thanks, a picture would be very helpful but don't go to too much trouble as I am sure I will work it out now I know roughly where it goes. FL2 2007 2.2d Auto SE. Baltic Blue. |
||
21st May 2023 8:36 pm |
|
micken Member Since: 11 Jan 2012 Location: West Yorkshire Posts: 50 |
Have a look for a video on here on removing the starter motor. Undoing that clip and swinging the loom out of the way makes it easier to access the starter motor bolts. It's a faff putting it back sometimes but it's there for a reason and should have been put back properly.
|
||
22nd May 2023 6:41 pm |
|
NeilTD4 Member Since: 21 May 2018 Location: Warwickshire Posts: 165 |
|
||||||||||||||
22nd May 2023 7:29 pm |
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 |
Thanks to both of you. That makes it a lot clearer. FL2 2007 2.2d Auto SE. Baltic Blue. |
||
22nd May 2023 8:13 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis