![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > How should these cable harnesses be routed? |
![]() ![]() |
|
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 ![]() ![]() ![]() |
I was checking stuff under the bonnet today and noticed some of the wiring harnesses under the airbox don't look quite right.
|
||
![]() |
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 ![]() ![]() ![]() |
Ok, I think I can answer (at least part of) my own question.
|
||
![]() |
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 ![]() ![]() ![]() |
Thanks, a picture would be very helpful but don't go to too much trouble as I am sure I will work it out now I know roughly where it goes. FL2 2007 2.2d Auto SE. Baltic Blue. |
||
![]() |
|
micken Member Since: 11 Jan 2012 Location: West Yorkshire Posts: 55 ![]() ![]() ![]() |
Have a look for a video on here on removing the starter motor. Undoing that clip and swinging the loom out of the way makes it easier to access the starter motor bolts. It's a faff putting it back sometimes but it's there for a reason and should have been put back properly.
|
||
![]() |
|
NeilTD4 Member Since: 21 May 2018 Location: Warwickshire Posts: 170 ![]() ![]() ![]() |
|
||||||||||||||
![]() |
|
lrman Member Since: 15 May 2023 Location: Hampshire Posts: 93 ![]() ![]() ![]() |
Thanks to both of you. That makes it a lot clearer. FL2 2007 2.2d Auto SE. Baltic Blue. |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
