Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Investigating clutch issue found this
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Glynmcc



Member Since: 05 Apr 2013
Location: Plymouth
Posts: 7

United Kingdom 2007 Freelander 2 TD4 XS Manual Indus Silver
Investigating clutch issue found this


Hi guys, had the clutch disappear into the floor on me, appears to be little loss of fluid from the reservoir, so initial hypothesis is master cylinder or then the slave, but while looking around I found this hole, it feels sharp and when the engine is running it’s leaking oily water, is it a factor?

Post #410063 13th Jul 2021 8:27 am
View user's profile Send private message View poster's gallery Reply with quote
SYFL2



Member Since: 16 Jun 2012
Location: Sheffield
Posts: 2597

2007 Freelander 2 TD4 HSE Auto Stornoway Grey

Is that the gearbox I can’t tell ? Could the damage have been caused by a trolley Jack ?

Post #410066 13th Jul 2021 9:28 am
View user's profile Send private message View poster's gallery Reply with quote
Glynmcc



Member Since: 05 Apr 2013
Location: Plymouth
Posts: 7

United Kingdom 2007 Freelander 2 TD4 XS Manual Indus Silver

I've never jacked it there, but could be. Only noticed it because liquid was leaking from there, and only after this clutch failure. That is the sump tank next to it.

Post #410067 13th Jul 2021 9:35 am
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 5063

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red
Re: Investigating clutch issue found this

Glynmcc wrote:

Hi guys, had the clutch disappear into the floor on me, appears to be little loss of fluid from the reservoir, so initial hypothesis is master cylinder or then the slave, but while looking around I found this hole, it feels sharp and when the engine is running it’s leaking oily water, is it a factor?


Do you mean the "D" shaped hole in the bottom of the bell housing ?
If so, then that's normal .
You can see it in this pic. To the left of the number 13



BTW I think your concentric clutch slave is leaking if oily liquid is coming out of the bell housing and your clutch has failed. Jules

Post #410069 13th Jul 2021 10:49 am
View user's profile Send private message View poster's gallery Reply with quote
Glynmcc



Member Since: 05 Apr 2013
Location: Plymouth
Posts: 7

United Kingdom 2007 Freelander 2 TD4 XS Manual Indus Silver

Thanks Jules, thought it was normal but it felt like it had some Burrs on it so wasn’t sure. I do believe the problem is my slave cylinder, after taking off the reservoir cleaning that out, bizarrely the outlet to the clutch hoses were partially blocked, then pumped the clutch a few times I now have that new dot 4 coming out of the hole.

Post #410071 13th Jul 2021 12:38 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site