|
|
| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
 | Home > Maintenance & Modifications > Hi - Roof Bars Question |
 
|
|
|
| Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4969   
|
Just 2 holes in the plastic trims at the front. Lift the trim up & have a look at where the roof rail bracket bolts are underneath. You just need to line up a hole through the plastic trim. A ruler helps.
I installed my roof rails, it's not difficult but take your time, get the right tools. Not worth bug_ering up the roof. Get a 21mm socket as you need to take 2 of these out & they can be very tough to free. Without a 21mm socket you can easily round the edges & you will be stuffed. 
The 4 rear mounts have plastic plugs, very carefully drill, preferably with pin vise to make hollow, you don't need to drill through, then turn old with pointy nose pliers.
They don't mention it, but run some Teflon tape around the thread of the new bolts you use. Procrastination, mankind's greatest labour saving device! Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18 |
||||||
22nd Apr 2021 11:13 pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
