Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Door doesn’t unlock from the inside
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241

United States 2008 Freelander 2 i6 SE Auto Tambora Flame
Door doesn’t unlock from the inside

Freel2 Readers,

I’ve read the posts about the motor failure in the latch mechanism and if the motor has failed then what you about to read likely won’t help.

However if the lock/unlock button moves but sometimes not far enough then keep reading

As you can guess I have this problem on one of my doors

To mitigate the problem I lubricated the cable

Note I held the cable high so that the silicone would flow down the cable

I’ll post here if it acts up and I need to take it apart again

Thanks

Paul






Post #402130 4th Jan 2021 12:22 am
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Freel2 Readers,

So far so good.

Before lubricating the cable the rear right door wouldn’t unlock and pressing the unlock button on the dashboard or the key fob wouldn’t unlock the door from the inside. It would be unlocked if you pulled on the outside handle.

Now that I lubricated the cable it unlocks every time.

Note: I do suspect that the mechanism is worn out and it will need to be replaced at some point.

But for now lubricating the cable has worked.


I will say that the engineer that designed the latch did a brilliant job, I am very impressed that they were able to do so much with just one cable for lock/unlock and opening.

The obvious down side to this very cleaver design is that it stops working when parts get slightly worn.

In summary the design is impressive but not fault tolerant.

I will post here if my temporary solution stops working.

One last thought if I do replace the lock mechanism I will also replace the cable at the same time.


Take care

Paul


Last edited by p_gill on 19th Jan 2021 5:04 pm. Edited 1 time in total

Post #402812 16th Jan 2021 9:34 pm
View user's profile Send private message View poster's gallery Reply with quote
sid



Member Since: 16 Jul 2015
Location: devon
Posts: 493

England 2009 Freelander 2 TD4 HSE Manual Stornoway Grey

Thumbs Up

Post #402815 16th Jan 2021 9:51 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1241

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Update.

Now that its been a while here is my update.

1. Lubricating the cable didn’t completely eliminate the unlock fault (inside door handle only)

2. If the door doesn’t unlock then pressing the key fob or dashboard unlock button a second time will work

Note: the door can always be unlocked manually and then the handle will open the door.


In summary it’s significantly better but not completely fixed.


Thanks

Paul

Post #404048 13th Feb 2021 11:11 pm
View user's profile Send private message View poster's gallery Reply with quote
gasman



Member Since: 02 May 2013
Location: Tyneside
Posts: 900

United Kingdom 2009 Freelander 2 TD4_e GS Manual Zermatt Silver

Thumbs Up Now at the point when I learn something new something old is lost out the other side !
Now retired so it doesn't matter anymore.
Freelander now gone.

Post #404070 14th Feb 2021 3:24 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site