Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > My Freelander 2 > 2009 TD4 timing belt snapped new engine? |
|
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
Too many variables and imponderables to answer. |
||
30th Dec 2021 1:43 pm |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 893 |
Sorry to here of your problem. Was the auxiliary belt very old? Now at the point when I learn something new something old is lost out the other side !
|
||
30th Dec 2021 2:02 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5001 |
How many miles on the clock?
|
||
30th Dec 2021 4:44 pm |
|
pmabz Member Since: 02 Oct 2014 Location: Wales Posts: 30 |
the auxiliary belt - I have no idea of its age, though I had the timing belt and water pump replaced earlier this year. There was mention of a bolt coming off the alternator pulley, which may have caused it all to snowball |
||
30th Dec 2021 6:28 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5001 |
You must be gutted having just had the cambelt replaced.
|
||
30th Dec 2021 11:44 pm |
|
AJ918 Member Since: 26 Mar 2018 Location: North West Posts: 260 |
Is the vehicle at the same garage that replaced the timing belt previously? Did you actually see the broken serpentine belt when the engine failed (at the road side) or is it just what you are being told? I find it difficult to see how a broken serpentine belt got inside the timing belt cover, unless the cover was broken. I would want to see the damaged parts at the repairing garage (unannounced visit) to understand what transpired. Good luck. |
||
31st Dec 2021 9:11 am |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2805 |
Agree with Jules and AJ918, the serpentine belt runs separately from the timing belt. I replaced my timing belt recently, a full set of covers enclose the timing belt then the serpentine or auxiliary drive belt is fitted over the pulleys driving the ac, power steering pump and alternator etc. My kit had a new serpentine belt included too which I fitted but even if it were to suddenly break, all would happen would be loss of powersteering, ac, etc etc, it would not interfere with the running of the engine. And in the circumstances where a belt failed slowly by fraying it could not physically get tangled with the timing belt because of the covers. Only possible scenario I could see this happening is if they failed to replace the covers when replacing the timing belt.
|
||
31st Dec 2021 12:53 pm |
|
IanMetro Member Since: 11 Sep 2017 Location: Somerset BS21 Posts: 3127 |
I would think that it is worth paying for a (properly qualified) Independent Inspection, Advice and Report.
|
||
31st Dec 2021 2:44 pm |
|
I Like Chips Member Since: 25 Jun 2017 Location: Ascott Under Wychwood Posts: 1540 |
This story has passed under my eye before |
||
31st Dec 2021 7:50 pm |
|
Badger51 Member Since: 01 Mar 2014 Location: Coffs Harbour Posts: 962 |
There is NO bolt associated with the alternator pulley! They are either feeding you bs, or you have not got the story right. (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal. 171037Km as of 09/05/22 Superchips Bluefin Flash Nanocom Evo II (also sold) |
||
31st Dec 2021 9:35 pm |
|
Deafender Member Since: 09 Mar 2019 Location: Buckingham Posts: 98 |
I’m no mechanical expert so wouldn’t comment on where the fault might lie in your particular case- but the comments so far here on your options/ next steps resonate with what happened for us.
|
||
1st Jan 2022 2:18 pm |
|
Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 2082 |
Was this the same place that did the timing belt? If so it sounds like they're trying to hide previous shoddy workmanship. I'm guessing the crank pulley bolt wasn't torqued correctly, allowing it to come loose or break completely, throwing the AUX belt, and knocking the timing out on the timing belt. There's no way a failure with the AUX belt can get to the timing belt, as its completely encased in a stout glass reinforced plastic cover. In my experience, serious piston damage is unlikely, the valves are soft enough to simply bend when the piston hits them. Once the head is off, an assessment of damage can be made, but my guess is to replace the bent valves, and put it back together. Hyundai Ioniq 5 Ultimate. The family car. 2009 Rimini Red SE TD4. Gone. 2006 Tonga Green i6 HSE. Gone. Audi A5 convertible, my daily driver. 1972 Hillman Avenger GT, the project. |
||
1st Jan 2022 5:04 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5001 |
I once owned an old Defender TD. After several years it started smoking. Took the head off to find all 4 pistons had valve impact damage from a cambelt failure sometime in the past.
|
||
1st Jan 2022 5:47 pm |
|
Rommel Member Since: 20 Aug 2017 Location: Sandhurst Berkshire Posts: 631 |
The old 19J TD was not a good engine I had one with the same issues cracked pistons smoking Etc had to rebuild it, 2013 FL2 XS.
|
||
1st Jan 2022 7:05 pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis