![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > In Car Electronics > Fitting an Android head unit |
![]() ![]() |
|
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1796 ![]() ![]() |
Can't help with fried head unit I'm afraid, checking the fuses is about my limit too.
|
||
![]() |
|
djburns Member Since: 08 Jan 2012 Location: Pyrenees Posts: 36 ![]() ![]() ![]() |
|
||
![]() |
|
Andy.p Member Since: 05 Aug 2021 Location: huntingdon Posts: 29 ![]() ![]() ![]() |
I have just got the Xtrons PQ70DLRL unit with android 10 and it's meant to have the control box to allow steering wheel control apart from track select. In other words the top and middle buttons on the right side of wheel will work but not the bottom one. Hope that helps, will see if its correct when I get round to fitting it |
||
![]() |
|
Simon J Member Since: 27 Jul 2019 Location: Norn Iron Posts: 719 ![]() ![]() |
I can’t see how the Xtrons unit would in any way affect the operation of Mode, Volume and Track select since these are functions of the LR head unit. Mode and Volume will surely continue to work, but Track select obviously won’t.
|
||
![]() |
|
Andy.p Member Since: 05 Aug 2021 Location: huntingdon Posts: 29 ![]() ![]() ![]() |
As my last post said the only button on steering wheel that does not work is the track select I can confirm that. the install was fairly straight forward ,but getting it all to work was a bit of a pain in the |
||
![]() |
|
Simon J Member Since: 27 Jul 2019 Location: Norn Iron Posts: 719 ![]() ![]() |
Thanks for the update, Andy. I assume that if you don’t have an existing LR screen then the MOST shunt isn’t needed? |
||
![]() |
|
Andy.p Member Since: 05 Aug 2021 Location: huntingdon Posts: 29 ![]() ![]() ![]() |
Hi Simon, I think that would be the case if you dont have the MOST system you wont need the shunt |
||
![]() |
|
Simon J Member Since: 27 Jul 2019 Location: Norn Iron Posts: 719 ![]() ![]() |
Thanks, Andy. I think there is a MOST system as I’m pretty sure that when I replaced the Bluetooth module it had a MOST connection, but with no original screen I wouldn’t expect to need the shunt. I’m still debating whether to splash the three hundred quid |
||
![]() |
|
Andy.p Member Since: 05 Aug 2021 Location: huntingdon Posts: 29 ![]() ![]() ![]() |
The best thing is you dont need to use LR bluetooth and you get the bonus of using things like Waze or Tom Tom direct from the phone and mirror your downloaded movies to watch (not when driving) on the screen if you get the add on mic too you can go hands free via the Xtrons unit. so if you got a basic FL2 with no infotainment this unit is a massive upgrade. Discovery 3 tdv6 gone
|
||
![]() |
|
Simon J Member Since: 27 Jul 2019 Location: Norn Iron Posts: 719 ![]() ![]() |
I quite like the LR Bluetooth phone connection with the steering wheel controls for answer and hang up. I assume that you can continue to use it while still using Car Play for music or navigation? I have the Alpine system which I find very good for what it is, but would like the addition of Car Play. |
||
![]() |
|
Andy.p Member Since: 05 Aug 2021 Location: huntingdon Posts: 29 ![]() ![]() ![]() |
|
||
![]() |
|
Simon J Member Since: 27 Jul 2019 Location: Norn Iron Posts: 719 ![]() ![]() |
Many thanks, Andy. That’s the same Alpine unit that I have. It really is a neat piece of kit. Hmmm…… |
||
![]() |
|
Andy.p Member Since: 05 Aug 2021 Location: huntingdon Posts: 29 ![]() ![]() ![]() |
Dam it just noticed the screen has gone back to standard because I disconnected the battery yesterday, I had Waze and instead of siri logo had the Land rover logo on the home screen will have to reset but you get the jist of what to expect. Discovery 3 tdv6 gone
|
||
![]() |
|
Simon J Member Since: 27 Jul 2019 Location: Norn Iron Posts: 719 ![]() ![]() |
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)