Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Does anyone know what this 90 degree pipe connector is for? |
|
|
to-LR2 Member Since: 31 Dec 2019 Location: Toronto Posts: 43 |
While changing my battery yesterday in my 2010 LR2, I noticed this little connector sitting in the tray behind the old battery.
|
||
3rd Jan 2020 4:41 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1354 |
Looks like the vent pipe elbow. |
||
3rd Jan 2020 4:44 pm |
|
Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 |
I think that also, as the pipe to elbow fitting is not pressure burred, as it would be for windscreen washer use. The union is only friction fit. ?? , |
||
3rd Jan 2020 6:23 pm |
|
to-LR2 Member Since: 31 Dec 2019 Location: Toronto Posts: 43 |
Doesn't seem to be from the headlight washers because the headlights are still getting wet from the spray.
|
||
3rd Jan 2020 8:08 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1354 |
The bent pipe fitting is simply to avoid the hose from kinking around a corner on the physical battery and preventing the gas from venting. Can you see where your hose is connected to the top of your battery? Is it connected directly to the top of the battery or is there another elbow fitting there in between the battery and the vent hose. Regardless, it should not be issue unless the battery can shift it's physical position, that should not be possible if it was properly installed. I think you had another thread with a pic of the new battery setup? I'll have a look but the pic was pretty dark from memory I think.
|
||
3rd Jan 2020 9:25 pm |
|
to-LR2 Member Since: 31 Dec 2019 Location: Toronto Posts: 43 |
Doesn't appear the be any kinks in the vent.
|
||
3rd Jan 2020 11:15 pm |
|
DEG5Y Member Since: 22 Jul 2016 Location: Widnes Posts: 162 |
Looks like an old battery breather pipe. |
||
5th Jan 2020 9:20 pm |
|
TooBlue Member Since: 30 Oct 2019 Location: Midlands Posts: 265 |
The connector should be attached to that pipe on right of the battery.
|
||
6th Jan 2020 9:06 am |
|
to-LR2 Member Since: 31 Dec 2019 Location: Toronto Posts: 43 |
|
||
6th Jan 2020 2:02 pm |
|
SYFL2 Member Since: 16 Jun 2012 Location: Sheffield Posts: 2594 |
That’s the one looks like someone lost the one you found and replaced,it or new battery had one on |
||
6th Jan 2020 2:23 pm |
|
to-LR2 Member Since: 31 Dec 2019 Location: Toronto Posts: 43 |
Cool.
|
||
7th Jan 2020 3:53 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis