Freel2.com - View topic - Freelander 2 Door Handle Change


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Freelander 2 Door Handle Change

Page 1 of 1

Print this entire topic ·

ad210358

Member Since: 12 Oct 2008
Location: Here and There
Posts: 7464

Freelander 2 Door Handle Change

I haven't changed the handles myself, but the guide on here is useless now as the pictures have been removed, so I've found another guide and placed it here.

Here is a view of the new kit.

Click image to enlarge

Drivers door + both rear doors are verily simple to fit start by unlocking your freely with the fob, remember to open one of the doors to save it keep relocking

Step 1

With a thin screw driver or a kitchen knife or a thin scraper You can see in this image I found it easier with a 1" Spatula.

Slide the Spatula in between the cap and rubber and gently prise the cap away from the car, you will most likely break 1 or both clips on the old ones as you remove it.

Click image to enlarge

Step 2
Once the cap as been removed hold of the handle with both hands and jerk it to the rear of the vehicle - you will find it slides 10 to 15mm.

Click image to enlarge

Step 3
Pull the handle as if you was opening the door, once the back is free slightly slide the handle towards the back of the car and handle will be disconnected and free.

Click image to enlarge

Step 4
Slide the new handle in the same way you removed the old one with the front first.

Click image to enlarge

Step 5
Slide the new handle towards the front of the car until it is in place - if you find a bit of resistance in pushing it back you will need to pull the door hook out with a piece of string or cotton (I did mine with cotton - you will see the hook when you do the handle change), just loop the cotton around the hook pulling it out has you slide the new handle in place. Once the handle is in place pull on the cotton to remove it - its very simple with the cotton/string if your handle doesn't locate first time.

Click image to enlarge

Step 6
Replace the cap as shown in photo with the back sliding in first.

Click image to enlarge

The finished article!

Click image to enlarge

Now on to the passengers door with the lock;

Step 1b
Open your passengers door and you will see a small rubber grommet.

Step 2b
Once you have removed the rubber grommet - just off centre you will see a TORX screw.

Be sure not to remove the screw completely - you will lose it in the door!!! while unscrewing it and at the same time pull on the lock till the lock is free, there will still be loads of tread of the screw not to lose it.

Click image to enlarge

Step 3b
Follow steps 4 and 5 above to replace the passenger side handle - I did need to use the cotton on this one to pull and locate the hook in to the handle.

Click image to enlarge

Step 4b
Replace the lock.

Click image to enlarge

Step 5b
I'm sure we all know how to remove and replace the lock cap, but if your not sure in how to do this, remove your key from your fob and slip it in to the slot underneath the cap to remove it. To replace it, slide the cap on from the back then clip in to place.

Click image to enlarge

All this will be as clear as day if you decide to buy a set of new handles for your Freelander 2 and they was in front of you and see all the clips and hooks

22nd Jun 2014 8:23 pm

Offshore1987

Member Since: 11 May 2014
Location: Hampshire
Posts: 496

2007 Freelander 2 TD4 XS Auto Baltic Blue

Top stuff

Daniel Freelander 57 plate XS Blue Auto

23rd Jun 2014 5:07 pm

chicken george

Member Since: 05 Dec 2007
Location: N. Yorks
Posts: 13289

2008 Freelander 2 TD4 XS Manual Santorini Black

I recognise that table with built in beach feature a certain ex forum member? At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

23rd Jun 2014 7:25 pm

ad210358

Member Since: 12 Oct 2008
Location: Here and There
Posts: 7464

Took his ball with him

23rd Jun 2014 8:45 pm

npinks

Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

good guide

23rd Jun 2014 9:27 pm

MLovatt

Member Since: 29 Aug 2015
Location: Bilston
Posts: 5

2008 Freelander 2 TD4 GS Manual Baltic Blue

Super little walk through, thanks.. Martin, (G0JCN)

4th Sep 2015 8:14 pm

cqr

Member Since: 05 Mar 2013
Location: kent
Posts: 1308

2008 Freelander 2 TD4 XS Auto Stornoway Grey

A good walk thou 2008 xs
Snorkel
raised axle/gearbox breathers
Mantec tank guard
Cb radio
Blanked EGR
Sump guard
Scratches
Snolkle

4th Sep 2015 8:45 pm

Tomtom

Member Since: 30 Apr 2017
Location: Brisbane
Posts: 23

2007 Freelander 2 TD4 GS Manual Narvik Black

Where are we getting the colour coded door handles from? Other LR models (RRS, RRV, D3?) or facelift FL2's?

1st May 2017 9:08 am

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 910

2007 Freelander 2 i6 HSE Auto Sumatra Black

Just done this to my i6. Drivers and both rears went in a treat. Left the Passenger front was left until last. Bloody thing will NOT go in . The rear location part is angled about 1mm further towards the back of the car and as such does not fit the location hole in the door. You can manipulate the handle slightly further forward and it will eventually go in but will not pull to open the door, or will pull but will stay out.
I've tried putting the old one back in and it just goes back in with absolutely no dramas. Same for the other 3 old handles. Looks like I've got one dodgy new handle, and it just happened to be the one I saved to put in last !

See pic. New handle on the right. Note the worn plastic cap on the new handle, this was off one of the old handles and was put on to see whether this was the problem. It was then that I noticed the real problem.

24th Apr 2019 6:07 pm

dondiddy

Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

2012 Freelander 2 TD4 HSE Manual Firenze Red

I bought a set of the chrome handles on Ebay from Powerfuluk and the passenger front handle was the last one that I did. I could not get the key cover to fit no matter how hard I tried and it was starting to get damaged with my repeated attempts. The original cover fitted without an issue. I contacted Powerful about the issue and they sent me a replacement the very next day with a request to return the faulty part so they could check what the issue with it was. They included a prepaid label for the returned part and the replacement they sent fitted without any further problems. I suppose these things can happen sometimes with pattern parts make in China!

24th Apr 2019 6:38 pm

RealBeale

Member Since: 13 Jun 2016
Location: Birmingham Great Barr
Posts: 910

Unfortunately for me, these are genuine LR parts !

24th Apr 2019 8:32 pm

Page 1 of 1

All times are GMT

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum