Hi guys. I’ve purchased a leather interior to fit into my 2007. The seats are also from a 2007 (I assume) as they are factory dated as “passed test 20.10.2007”). I’ve turned the drivers seat upside down and there’s three wires which have already been cut. Am I correct in thinking one goes to switched live on a piggyback in the passenger fuse box and two are grounded under the centre console (in between both seats)?

The passenger seat has no wires cut so will this just be a plug and play?

Many thanks




Last edited by Novabella on 4th Apr 2018 9:57 pm. Edited 1 time in total

Here is link to FL2 Repair and Wiring.

https://www.dropbox.com/s/n0e6q5jj1l1fe2z

If you need further help, then type of seats and wiring colours would be helpful.

Edit - sorry for some reason your picture did not show up initially, although the above info would still be useful. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 79k+ miles) (MY2015)
Metro in its 11th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Last edited by IanMetro on 4th Apr 2018 10:00 pm. Edited 1 time in total

Thank you. I’ve just put a pic of the three cut wires up. 1 is green/white and two are black/white.

They are full electric but not heated. Thanks