Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > In Car Electronics > Retrofit reverse camera (13MY Onwards) |
|
|
robbyvrs Member Since: 14 Oct 2012 Location: Yorkshire Posts: 430 |
Any updates on this project? |
||
18th Mar 2018 8:21 pm |
|
Vanny Member Since: 06 Dec 2015 Location: Cheshire Posts: 437 |
Not yet, I 'only' need the tailgate harness, but so far I've struggled to get this from Duckworths, and Dan is now out for a week.
|
||
18th Mar 2018 9:25 pm |
|
markflickr Member Since: 29 Jul 2017 Location: Cambridgeshire Posts: 74 |
I have the MY13 XS and mine doesn't have the wiring preinstalled |
||
19th Mar 2018 10:24 am |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Do you have Navigation? MY15
|
||
19th Mar 2018 10:59 am |
|
markflickr Member Since: 29 Jul 2017 Location: Cambridgeshire Posts: 74 |
I do... Gen2.1 |
||
19th Mar 2018 1:35 pm |
|
Stuartc Member Since: 01 Dec 2014 Location: Perth, Australia Posts: 2292 |
Then I would logically assume that the wiring in the headliner is there as it all part of the telematics harness to the roof dome GPS. MY15
|
||
19th Mar 2018 1:59 pm |
|
georgetina Member Since: 28 Jul 2012 Location: Wiltshire Posts: 65 |
I too have a need for the reversing camera on my 2013my HSE. So can I add my encouragement to this post. I have looked for the camera fitting marks on my boot lid but cannot see any. Do I have to remove the handle to see them?. |
||
20th Mar 2018 5:00 pm |
|
blacktiger Member Since: 31 Oct 2015 Location: St.Leonards on sea Posts: 564 |
The LR rear camera takes the place of one of the number plate lamps. The difficulty in fitting it all is getting the wiring into the rear door (it needs an extra loom) and having the CCF altered. MY13 Santorini Black SD4 HSE |
||
20th Mar 2018 5:50 pm |
|
Vanny Member Since: 06 Dec 2015 Location: Cheshire Posts: 437 |
On a 13MY car, the camera should be in an extra hole and not a replacement of the number plate light. The first post in this topic shows where LR have kindly inscribed what needs to be cut out in the plastic. The loom is not too expensive, although changing it really needs the roof lining dropping. My real problem is figuring out which of the 5 harnesses is the right one. Pretty sure I know which is right for my pre-wired car now, but i'm very much out of money! |
||
20th Mar 2018 9:13 pm |
|
Blackbird14 Member Since: 26 Apr 2013 Location: Staffordshire Posts: 64 |
Hi,
|
||
22nd Mar 2018 3:04 pm |
|
markflickr Member Since: 29 Jul 2017 Location: Cambridgeshire Posts: 74 |
Dave, where did you get that if you don't mind me asking, sounds like a good fix for little to no messing around |
||
22nd Mar 2018 5:43 pm |
|
Blackbird14 Member Since: 26 Apr 2013 Location: Staffordshire Posts: 64 |
Hi Markflickr,
|
||
22nd Mar 2018 6:17 pm |
|
markallday Member Since: 04 Jul 2010 Location: Northants Posts: 6 |
Hi
|
||
2nd Apr 2018 8:23 pm |
|
Boxbrownie Member Since: 17 Mar 2019 Location: Looe Posts: 2053 |
Yes but, bumpers aren’t designated parking aids Regards David Lovely i6 has now gone, but not me...... Please let me know if anything in my post offends you, as I may wish to offend you again...... |
||
22nd Mar 2019 9:19 am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis