got this 'Halloween' offer by email looks like a high lift jack suitable for fl2

Im not buying one just passing on the news
http://www.teng.co.uk/2000lj-sealey-2-tonn...-118064169


if its no good dont come back to me At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

forget it , amazon do it cheaper, so much for the special promotion email At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

I bought one of these recently : can't remember who recommended it but it was on of the guys on here.

http://www.sgs-engineering.com/garage-equi...olley-jack

Obviously at the price it is Chinese, but it's fit for purpose, big and rugged. The axle stands and wheel chocks available are excellent bits of kit. Used the lot the other day to change the rear pads on the LR then rotate the wheels on the Subaru.m 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership

2016 Subaru Outback SE 2.0 diesel SE Premium Lineartronic Sold 2024 after 8 years and 80k miles . Best Car I ever owned !

2023 Toyota Hilux invincible X 2.8 Auto .

I'm pretty sure SGS are a British manufacturer aren't they? 2013 - Freelander 2 XS
2005 - Vauxhall Astra - Gone banger racing
2017 - Ford Mondeo ST-LINE X - Gone
2012 - Discovery 4 HSE - Gone
2013 - Ford Mondeo Titanium X Sport - Gone
1999 - Volkswagen Polo - Blew up
2007 - Ford Mondeo ST TDCI - Gone
1998 - Citroen Saxo - Gone

They are a British company and I'm sure they do make some items like gas struts, , their website is quite cleverly deceptive, and if you read it in depth . they do not claim to make the jacks etc. All of their " garage equipment " looks to be 100% Chinese, ( now't wrong with that I've loads of Clarke gear, and Halfords Pro Tools fine for the DIY -er ). If you think about it there is no way you would buy a UK made 3 tonne trolley jack for £60 odd quid never mind a 2 tonne jack for £16 ! I bought a jack, a pair of 6 tonne ratchet axle stands and a pair of rubber wheel chocks delivered for a hundred and something quid and they are very decent things

They do claim to have things manufactured by top brands in the industry, whether that includes the Shanghai Dangerous Toy and Fireworks company I'm not sure 2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership

2016 Subaru Outback SE 2.0 diesel SE Premium Lineartronic Sold 2024 after 8 years and 80k miles . Best Car I ever owned !

2023 Toyota Hilux invincible X 2.8 Auto .

Aaah, gotcha. Didn't see they did a jack for £16. That does seem a bit cheap

Watch out for sneaky tricks
http://www.ybw.com/vhf-marine-radio-guide/...-mark-4607 At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Always put a block of solid wood under the car in a position and height clearance so you will not get squashed as safety precaution. All tools from china have a habit of not living up to the task!

Mechanics are required to put safety pins in hydraulic hoists before they go under the car as a secondary level of precaution so they do not get squashed and killed. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

its not daft to throw your wheel under the car too, some of the polishers and buffers will check extra hard that jacks and axles stands are good to go if there is a slight chance that their alloy gets damaged whilst saving their life At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Got one and it works fine.

http://www.freel2.com/forum/topic25725.html 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Lightwater wrote:

Always put a block of solid wood under the car in a position and height clearance so you will not get squashed as safety precaution. All tools from china have a habit of not living up to the task!

Mechanics are required to put safety pins in hydraulic hoists before they go under the car as a secondary level of precaution so they do not get squashed and killed.

The 6 tonne ratchet axle stands have a massive safety pin as well as the ratchet . They are an impressive piece of kit . I've always been very safety aware since the sills on my Dad's Morris Oxford collapsed ( well they would of it was well over 10 months old ..) as he was jacking it up. 2 lessons learned 50 years ago ,1) never trust a jack. 2) my Dad could Eff and Blind like a good 'un  2009 GS Auto Zermatt Silver - Sold June 21 after 10 years of ownership

2016 Subaru Outback SE 2.0 diesel SE Premium Lineartronic Sold 2024 after 8 years and 80k miles . Best Car I ever owned !

2023 Toyota Hilux invincible X 2.8 Auto .