Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Diff noise, bearing repair, leaky half-shaft
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
SparkHops



Member Since: 10 Nov 2015
Location: Durham
Posts: 3

United Kingdom 2009 Freelander 2 TD4 HSE Manual Santorini Black
Diff noise, bearing repair, leaky half-shaft

Hi guys,

I've been diagnosed with the diff bearing problem by my local dealer. Booked in to do the bearing repair this week...

I since had a look under the car at the diff (crawled under from the back) and notices a covering of oil over the passenger side half-shaft near the rubber boot at the diff, contamination extends over the back half of the diff. The drivers side half-shaft and boot is completely dry and clean.

Worried that

1) the garage didn't mention this oil leak, seems weird that they didn't!
2) the bearing repair will just be the start of a few extra jobs that are going to be needed to cure this leak
3) damage has maybe been done to the diff through losing oil.

Any thoughts on this or advice?

Cheers.

--- 2008 FL2 HSE TD4, Gen4 Haldex (according to VIN number range) ---

Post #299296 23rd May 2016 7:56 pm
View user's profile Send private message View poster's gallery Reply with quote
iain cooper



Member Since: 27 Aug 2007
Location: north of Glasgow
Posts: 1989

Scotland 2009 Freelander 2 TD4_e HSE Manual Lago Grey

strange you never noticed it before, as some oil drips would be evident on your drive.

sounds like the dealer has done something when investigating the problem ?

Iain

Post #299337 24th May 2016 2:12 pm
View user's profile Send private message View poster's gallery Reply with quote
SparkHops



Member Since: 10 Nov 2015
Location: Durham
Posts: 3

United Kingdom 2009 Freelander 2 TD4 HSE Manual Santorini Black

On-street parking so possible I just haven't realised... spoke to the garage today, they tell me the diff repair includes replacement of the half-shaft seals - so likely the mechanic didn't bother mentioning it as it would be put right as part of the other work.

Fingers crossed all will be put right soon enough Smile

Post #299363 24th May 2016 10:07 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site