Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Disable Haldex ['Dink' sound from rear of car]
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
de1979



Member Since: 25 Sep 2014
Location: UK
Posts: 166

England 

Pedro wrote:
I will report back on the outcome in a month or so.


Any update Pedro?

Post #319929 21st Mar 2017 5:01 pm
View user's profile Send private message View poster's gallery Reply with quote
de1979



Member Since: 25 Sep 2014
Location: UK
Posts: 166

England 

Just an update. Having had the dink sound for a couple of years, I've had to start chasing down a whine from the rear. So I pulled fuse FB6 finally, and lo and behold the dinking has disappeared. Refit the fuse and it's straight back again. I've topped up with haldex oil (using correct procedure) and it has not changed the dink at all.

Post #319934 21st Mar 2017 5:54 pm
View user's profile Send private message View poster's gallery Reply with quote
Lord Rich Tea Biscuit



Member Since: 06 Sep 2016
Location: Norfolk
Posts: 116

United Kingdom 2007 Freelander 2 TD4 GS Manual Stornoway Grey

Interesting...
I noticed this "Dink" sensation a while back, and assumed it was something handbrake-related, as I too got it when rolling forward after being reverse-parked in a parking space.
If I remember correctly, it also didn't matter whether drive was being taken-up or whether holding a slow speed in first gear.
Perhaps it's just normal...

HOWEVER... I don't think it would be related to the "clunk" I get when changing gear from 2nd to 3rd and release the clutch.
It's not 100% of the time either, but no matter how gingerly I release the clutch, it can be there and sometimes sounds worse than on other occasions.
THIS sounds like drive being taken-up or play in splines... but where?
I had my haldex oil serviced back in January and that had no effect. Confused "We're in danger, we've got to get out."
"What are you talking about?"
"I've been called a ponce."

Post #325503 19th Jun 2017 4:31 pm
View user's profile Send private message View poster's gallery Reply with quote
ROBM



Member Since: 11 Sep 2019
Location: OXFORDSHIRE
Posts: 20

England 2009 Freelander 2 TD4 XS Auto Martinique Blue

I have this "dink noise" too. Removed the Haldex fuse and noise gone. Seems to be the initial take up when moving off. As I have no physical history on a Haldex service its booked in with Bell Engineering in November. I'll report back when done to see if this cures mine or if they can diagnose it if it doesn't.

Post #379113 1st Oct 2019 11:34 am
View user's profile Send private message View poster's gallery Reply with quote
Tigertim



Member Since: 23 May 2016
Location: Doncaster
Posts: 124

United Kingdom 2008 Freelander 2 TD4 HSE Auto Zermatt Silver

I’ve looked into this before and it is the tiny amount of play in the prop uj bearings . By disabling haldex you remove the load on the prop hence no ding when haldex disabled .

Post #379126 1st Oct 2019 2:48 pm
View user's profile Send private message View poster's gallery Reply with quote
rsash



Member Since: 20 Jan 2015
Location: Pineapple Picking Country
Posts: 91

Wales 2014 Freelander 2 TD4 SE Manual Orkney Grey

Had this issue, a light dink when changing from forward to reverse directions and back, it was the driveshafts and is a known issue to LR.
First thing they try is to remove and Locktite the splines but this failed.
Had new driveshafts and hubs fitted under warrantee, would have cost around £4k in 2015.
Problem solved.

Post #379218 3rd Oct 2019 4:58 pm
View user's profile Send private message View poster's gallery Reply with quote
ROBM



Member Since: 11 Sep 2019
Location: OXFORDSHIRE
Posts: 20

England 2009 Freelander 2 TD4 XS Auto Martinique Blue
UPDATE

Well I took a trip out to see Austen at Bell Engineering ( http://www.bellengineering.co.uk/ ) yesterday and he carried out a service on the haldex and changed the rear diff oil too.

First off I couldn't be more happy with the service he provided and the knowledge and advice he gave. If you have any questions regarding the driveline on your Freelander then he is definately the man to talk to. He checked all the possible issues Diff bearing, PTO splines etc and found no problems.

Secondly I haven't had the "Dink Noise"since.

Having spoken at length to Austen and now experienced his professional service I won't hesitate in recommending him. Its well worth the journey! Very Happy Thumbs Up

Post #381749 26th Nov 2019 11:01 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site