Well it's my birthday and I bought myself a present as I decided life's too short! And after recently fitting the OE exhaust finisher, and was/is very happy with result, I decided 2 is better than 1 (outlets that is! ) .


And Clamp






Parts Schematic.



Reason for starting a new topic on this is that there seems to be "bibs and bobs" of information for doing this and some ambiguity around pipe size's and methods. I would also be interested in some guidance from Forum members whom have done this.

Firstly the parts are LR052129 rear back box Si4 (apparently they are all the same part now Si4/Si6) and Clamp LR000953 (refer further down topic - correct part number LR015372) from Schematic above.
Since receiving the parts I can confirm that on a MY15 that the Diesel System and Petrol have the same diameter.


LR052129 si4 Petrol is 60mm Diameter


MY15 Freelander 2 Diesel is 60mm Diameter.

The clamp is suppose to join the two sections together and this is where you have to cut the diesel model pipe as it's all one piece from the intermediate pipe or DPF if you have one (no DPF in Australian specification Freelander 2's).




This is where I need some assistance from members as I tried to test the clamp today on the back
Box and it appears that even fully wound tight it will still not grip the pipe?
Lightwater, Pilllip - by any chance would one of you guys be kind enough to send a pic of the clamp on your Si4's so I can see how it's attached? Would be very grateful as a picture can say a thousand words. As I'm using OE LR parts I'd like it to look how it's meant to be!

I suppose I'm trying to get all the information on completing this job before I start so as to avoid any problems. Plus if anyone wants to also do this changeover then it's clear how to proceed.


Thanks guys  MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Last edited by Stuartc on 10th Sep 2015 10:14 am. Edited 5 times in total

All the manual seems to say is "Install the rear muffler and tighten the service sleeve.
Torque: 40 Nm".

I'm hoping/it should be as simple as that but the clamp today didn't seem to be closing in on the pipe before I ran out of adjustment I didn't go all the way as I didn't want to fully close the clamp
Before it went on. I thought I'd ask to see if anyone else had run into this but I Haven't read anyone else on the forum use this clamp.
I'm hoping I can get a pic of one already clamped to get clarification. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Stuart,

Just had a look underneath my Si4 and and it looks as though the pipe is continuous from the back box past the cat to around the A pillar where there's a clamp.

I'll try put a pic up

Tom

PS There are a couple of pics in my gallery. driving on the right side

Last edited by anglaslt on 25th Aug 2015 1:54 pm. Edited 1 time in total

Thanks Tom that would be of great assistance.
Seems strange it continuous as the schematic shows 2 pieces from cat back on Si4?
Ps Love your Tan interior  MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Now in the gallery. Hope it's clear enough.

Thanks Stuart, yes I think Havana/tan go well together. driving on the right side

Wow! That's very interesting as is a completely different system to the schematic. You should post these pics up as I'm sure nobody be aware of that configuration. Must be a region/emission specific specification.
As you can see the Australian system is separate from rear axle back to rear box.
Guess you can't help me with pic of clamp then Thanks for offering though, much appreciated

 MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Stuart, from the manual it looks as though the original factory fitment has a single pipe right back to the box. If you need to replace the back box you cut that pipe and use the connector to join the new back box.

I suppose the real test is whether it grips when torqued to 40Nm.

Ok well this is interesting! I wonder why the part schematic shows the intermediate pipe then? Be interesting if we can get Lightwater or Philllip to confirm.
Yes, could be right about the clamp, I really didn't want to wind it up all the way today. It must be correct. it better be!  MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

pab wrote:

All the manual seems to say is "Install the rear muffler and tighten the service sleeve.
Torque: 40 Nm".

You have a PM.

Puuuurfect!!!  MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

Topix clearly states that changing both petrol and diesel back box's involves cutting the pipe 300mm from the leading/front face of the back box so all systems must be one piece from factory, mystery solved, logical.
I've still got a dilemma with the clamp, as you can see its mm's away from gripping pipe fully wound in so I've returned it to the LR parts department whom are going to verify correct part.



Service also confirmed it should slide over both pipes and just clamp so we"ll see what comes back from the parts department, hopefully it's just wrong clamp.
In the meantime I'm cutting nothing and the new rear back box is living in life of luxury in the second bedroom!  MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)

I think it is a continuous pipe. I will look at it in the morning. No light in the garage & we have some of that strange wet stuff from the sky which we haven't had for a month or so. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Yeah it looks like you guys have been copping it for the last 24hrs!!!! None here, dry as!
when you can Lightwater, no hurry and thxs
I'll suspect all one piece as it shows on Topix cutting pipe and using sleeve for both petrol and diesel. MY15
Tyre Pressure Monitoring System (TPMS)
Surround Camera System
InControl Apps soon to be replaced with CarPlay (WIP)
Meridian Premium Surround Sound
Digital Audio Broadcast
Timed Climate
Cruise ECO Data
Follow Me Home Reverse
Extra Features Menu
Picture In Motion
4x4i screen (WIP)
Digital Broadcast TV
Meridian Rear Media with WIFI
Factory Powered Tailgate
Blind Spot Monitoring (BSM)
Reverse Cross Traffic Alert (RCTA)
Electrochromatic Wing Mirrors (WIP)