Thinking about a very small mod of installing LEDs in to the handles and may be one in the mirror.

Whats peoples thinking ( note I do not want Blackpool Illuminations - it will be accents only )

Does any one know where I can take a power feed in the dash from the dash lighting adjuster so they can be linked

Does any one have a break down of the HSE mirror - ie how to dismantle ?

T Terran



'The' Car For The Modern Day UK Roads ( ie all the pot holes )

'A Freelander that leaks oil is just marking its territory' - Wise words

Now a member of the FL2 'Silly Bill' Club

Waterfall lighting they call it in Land Rovers nowadays I think.

Yes. 100% agree with the the idea of it. Really miss it from the RR I had previously, and even my little mini has it.

Would be simple to do, a few well placed LED's. Only issue being make sure that they are recessed properly so that you don't see them directly. I've not bothered to look yet, but had been assuming that I would be able to get some recessed LED holders from the likes of RS Components.

I have disassembled HSE mirrors for couple of times, it's pretty easy job when you know how to do it.

It's very informative topic here, just take a look.

It's very important to use very short self tapping screw in lower inner corner.

http://www.disco3.co.uk/forum/topic101334.html?view=previous

Thanks for the link... ill have a look at that.

Re the LEDs... found some on ebay that are resessed.

Any thoughts on linking to the dash levels.

T Terran



'The' Car For The Modern Day UK Roads ( ie all the pot holes )

'A Freelander that leaks oil is just marking its territory' - Wise words

Now a member of the FL2 'Silly Bill' Club