Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Terrain Response fault (and unknown warning lights!)
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
tyke



Member Since: 11 Nov 2013
Location: United Kingdom
Posts: 1

United Kingdom 2007 Freelander 2 TD4 HSE Manual Zermatt Silver
Terrain Response fault (and unknown warning lights!)

Hi Folks,

My '07 model has me tearing my hair out now after accumulating a number of issues. My local LR garage is more of a Defender specialist and can't really figure out (or be bothered with!) the problems:

1) Terrain Response fault - traction reduced. Message has been coming up every time it's driven, but doesn't appear to drive any differently. A main LR dealer said it was linked to the Haldex pump, which, if replaced, may or may not fix it. As there's no noticeable change to how it's been driving (and they quoted in the region of £3k to fix) I haven't bothered.

2) two amber warning lights, which I can't find the meaning of - one immediately below the temperature gauge (circle with a ! in the middle) and one furthest to the right below the rev counter (the triangle with a ! inside).

Any pointers gratefully appreciated

Thanks,
Tyke

Post #206682 11th Nov 2013 7:51 am
View user's profile Send private message View poster's gallery Reply with quote
alex_pescaru



Member Since: 12 Mar 2009
Location: RO
Posts: 4642

1.
It could be just a sensor problem. Earlier cars with Haldex3, like yours, could develop a problem with Haldex pressure sensor.

2.
Circle + exclamation - Brake warning indicator (low fluid or Emergency Brake Assist or Electronic Brake Distribution)
Triangle + exclamation - Dynamic Stability Control error
Could be just a simple problem with one of the ABS sensors.

Anyway, a fault code reading session with a compatible diagnostic tool it will help a lot and clarify some issues...

Ah.... And a reading of the Handbook will also be beneficial... For example page 20...
If you don't have one, here you could find one: http://www.freel2.com/forum/topic10621.html
 

Post #206683 11th Nov 2013 8:01 am
View user's profile Send private message View poster's gallery Reply with quote
Andy131



Member Since: 09 Dec 2009
Location: Manchester
Posts: 2183

United Kingdom 

Got to agree with Alex on this one.
Had a wheel sensor that had been given a knock. they are very sensitive to mounting position.
When it is out of tolerance the ABS cannot reliably tell the wheel speed, so it turns off the ABS.
The same sensor is used for traction control and the stability program.

You could try removing each of the sensors in turn and refitting them.
Even if this works you might still have to have the fault cleared using the appropriate diagnostics tool. Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Post #206719 11th Nov 2013 1:16 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site